Electrolux Dishwasher: not running

Professional Repair Guide

What is this symptom?

Is your Electrolux dishwasher not running? You're likely facing issues such as a door not fully closed, power interruptions, or faulty components. This guide will help you troubleshoot common problems preventing your dishwasher from starting a wash cycle.

Urgency: Medium

Important Tips for Electrolux Models

Electrolux dishwashers wonâ€™t start if Delay Start or Child Lock settings are active
Lack of overlap between door lock and diamond badge can prevent start in AirDry models

Possible Causes

Door not fully closed or latch not engaging

How to Identify: Dishwasher will not start and usually no lights or sounds unless door is fully clicked shut; pressing door firmly results in click.

Part: Door latch / door switch

No power or insufficient power input

How to Identify: No display lights up; circuit breaker may be tripped; outlet not functioning; unit doesnâ€™t react to controls.

Part: Power supply / breaker / hardwired connection

Faulty water supply or valve preventing fill recognition

How to Identify: Dishwasher power on but does not proceed into fill phase; water not entering; water supply valve off.

Part: Water inlet valve / water supply hose

Defective main control board or touchpad

How to Identify: Control panel unresponsive, no cycle starts, error codes present; other components tested good.

Part: Main control board / touchpad

Blown thermal fuse preventing power to electronics

How to Identify: Dishwasher completely unresponsive even with power; multiâ€‘meter shows lack of thermal fuse continuity.

Part: Thermal fuse

DIY Solutions

Ensure door completely closed and latched

Easy 2-5 minutes

Open dishwasher door fully.
Push door firmly until you hear/latch feel a solid click.
Try starting cycle again.

Cancel Delay Start or Child Lock settings

Easy 1-3 minutes

Look for Delay Start or Child Lock indicators on control panel.
Press and hold the CANCEL or START/CANCEL button per manual to reset.
Select wash cycle and try start again.

Check power supply and reset breaker

Easy 5-10 minutes

Confirm dishwasher power cord/hardwire is connected.
Locate household breaker panel.
Reset dishwasher circuit breaker by switching off then on again.
Test control panel for lights and try start.

⚠️ Safety First: Avoid working on live electrical circuit; ensure breakers are off if accessing wiring.

Professional Repairs

Replace door latch or door switch

Estimated Cost: $30 - $120

Replace water inlet valve

Estimated Cost: $50 - $150

Replace main control board

Estimated Cost: $150 - $400

Replace thermal fuse

Estimated Cost: $20 - $60

When to Call a Professional

Dishwasher shows error codes that DIY cannot resolve

Unit has internal electrical faults or failed components

Dishwasher powered but no water enters after supply checks

Preventive Maintenance

Clean and inspect door latch regularly: Start issues due to latch misalignment or debris
Frequency: monthly
Run dishwasher on empty with dishwasher cleaner: Build-up that can affect sensors and valves
Frequency: monthly

Frequently Asked Questions

Why is my Electrolux Dishwasher not running?

Common causes include a door not fully closed, power issues, or a faulty water valve.

How do I fix Electrolux Dishwasher not running myself?

Check that the door is latched, reset the controls, and confirm power supply.

How much does it cost to fix not running?

Repair costs range from $20 to $400 depending on the issue, like door latch or control board.

When should I call a technician for not running?

Call a technician if DIY solutions fail or if you suspect major component failure.

References & Sources

Dishwasher Not Starting - Electrolux Official
What should I do if dishwasher is not starting? - Electrolux Official

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Faulty control electronics module
Power supply issues (tripped breaker or faulty outlet)
Blocked or malfunctioning door latch

User Suggested Solutions

Check the power supply by ensuring the dishwasher is plugged in and the circuit breaker is not tripped. If necessary, reset the breaker and test the outlet with another appliance.
Inspect and replace the control electronics module if it is damaged. This involves removing the dishwasher's front panel, disconnecting the old module, and installing a new one.
Check the door latch for blockages or damage. Ensure it closes properly and replace it if necessary. This can usually be done by removing screws and replacing the latch mechanism.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Electrolux Dishwasher with Errors 03 & 11

Community Discussions

failed to run, showing error 03 and then error 11

The dishwasher started functioning after a power cycle and checking the control electronics module.