Electrolux Dishwasher Error i50
⚡ Quick Answer: The Electrolux dishwasher error code i50 indicates a malfunction in the circulation pump motor, which can hinder proper water circulation during the w... ✅ DIY Fixable
What Does Error i50 Mean?
The Electrolux dishwasher error code i50 indicates a malfunction in the circulation pump motor, which can hinder proper water circulation during the wash cycle. This error often manifests as premature cycle stoppage, weak water spray action, or the display of the i50 error code. Addressing this issue typically involves troubleshooting the pump motor or its control circuitry, as obstructions or debris can also contribute to the problem.
Common Symptoms:
- Dishwasher stops prematurely after water fill
- No or weak water circulation/spray action during wash
- Error i50 displayed and dishwasher won’t complete cycle
Possible Causes
- Circulation pump motor failure or malfunction (high)
- Faulty control board/triac driving circulation pump (medium)
- Obstruction or debris causing pump blockage (medium)
How to Fix Error i50
DIY Fix Basic i50 Troubleshooting
- Turn off and disconnect power to the dishwasher
- Check and clean filters and sump area of debris or foam
- Restart the dishwasher and run a short cycle to see if the error clears
Technician Only Professional Diagnosis and Repair for i50
- Verify circulation pump motor operation and test continuity
- Inspect and clear any obstructions from the pump impeller
- Test control board triac and related circuitry for faults
- Replace defective circulation pump motor or control board as needed
Parts needed: Circulation pump motor, Control board/triac, Pump impeller components
- If error persists after cleaning and basic reset
- If electrical testing shows control board or pump motor faults
- If user is uncomfortable performing internal inspections
Next step
Choose the next step for i50
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-15 ohms |
| part_number | 154567401 |
| voltage_rating | 120V AC |
Common Questions
What does i50 error mean on electrolux dishwasher?
The i50 error indicates a malfunction in the circulation pump motor, causing issues with water circulation.
Can I fix electrolux dishwasher i50 error myself?
Yes, you can troubleshoot by cleaning filters and the sump area, then restarting the dishwasher.
How much does it cost to fix i50 error?
Repair costs for the i50 error typically range from $150 to $500, depending on parts and region.
When should I call a technician for i50?
Call a technician if the error persists after cleaning, or if you are uncomfortable with internal inspections.
Sources & References
- Dishwasher displays error code i50 (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!