Electrolux Dishwasher Error i60

⚡ Quick Answer: The Electrolux dishwasher error code i60 signifies a heating or water temperature issue, indicating that the appliance cannot heat water to the requir... ✅ DIY Fixable

What Does Error i60 Mean?

The Electrolux dishwasher error code i60 signifies a heating or water temperature issue, indicating that the appliance cannot heat water to the required level. This can lead to incomplete cycles, unclean dishes, and detergent not dissolving properly. Common causes include water temperature being outside the normal range or a control board malfunction. Addressing this issue promptly is essential to ensure optimal dishwasher performance.

Common Symptoms:

  • Dishwasher fails to heat water
  • Cycle may stop or not complete properly
  • Dishes not cleaned fully / detergent not dissolved

Possible Causes

  • Water temperature outside normal range (too cold or too hot) (high)
  • Control board / electronics error affecting heating control (medium)

How to Fix Error i60

DIY Fix Basic User Troubleshooting

  1. Ensure inlet water temperature at installation does not exceed 60°C
  2. Turn off and unplug the dishwasher for at least 60 seconds, then restart and select a cycle
  3. Check and clean filters and sump to ensure no foam/suds or blockages

Technician Only Technician Level Diagnostics and Repair

  1. Verify water temperature sensor readings with a multimeter and replace if out of spec
  2. Test the heating element for continuity and replace if defective
  3. Inspect wiring harness to heater and sensor for damage and repair connections
  4. If heating system and sensors are good, test and potentially replace the control board

Parts needed: temperature sensor (thermistor), heating element, wiring harness, control board

🛑 When to Call a Pro:
  • If error persists after basic resets and cleaning
  • If multimeter diagnostics indicate control board issues
  • If any wiring damage is found involving high voltage circuits

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number 154567101
voltage_rating 120V AC

Common Questions

What does i60 error mean on electrolux dishwasher?

The i60 error indicates a heating issue, preventing the dishwasher from reaching the required water temperature.

Can I fix electrolux dishwasher i60 error myself?

Yes, you can try basic troubleshooting like checking water temperature, cleaning filters, and performing a reset.

How much does it cost to fix i60 error?

Repair costs for the i60 error range from $100 to $500+, depending on parts and labor.

When should I call a technician for i60?

Call a technician if the error persists after troubleshooting, if control board issues are detected, or if there's wiring damage.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!