Electrolux Dishwasher Error i10

⚡ Quick Answer: The Electrolux dishwasher error code i10 signals a water inlet issue, preventing the appliance from filling with water. Common symptoms include the di... ✅ DIY Fixable

What Does Error i10 Mean?

The Electrolux dishwasher error code i10 signals a water inlet issue, preventing the appliance from filling with water. Common symptoms include the dishwasher not starting a cycle due to lack of water, the display of the i10 error code, and the machine pumping out water shortly after attempting to fill. Possible causes include water supply problems, a kinked or damaged inlet hose, or clogged filters. Addressing these issues promptly can restore normal operation.

Common Symptoms:

  • Dishwasher does not fill with water when starting a cycle
  • Error code i10 displayed or warning light/beep once
  • Dishwasher pumps out water shortly after attempting to fill

Possible Causes

  • Water supply issue (no water, closed tap, low pressure) (high)
  • Kinked, twisted, or damaged inlet hose (high)
  • Clogged inlet hose filter (medium)
  • Severely clogged dishwasher filters/drain system leading to system misinterpretation of water fill (medium)
  • Faulty hydrostat/pressure sensor (medium)

How to Fix Error i10

DIY Fix Basic checks and reset

  1. Ensure the water tap to the dishwasher is fully open
  2. Check that no other appliance is significantly using water at the same time
  3. Inspect the inlet hose for kinks or bends
  4. Turn off power, wait 1–2 minutes, and restart unit to clear transient error

DIY Fix Clean inlet and dishwasher filters

  1. Turn off water and power
  2. Disconnect inlet hose and clean flow filter at its base
  3. Remove lower dishwasher rack and clean interior filters of debris
  4. Ensure drain hose is correctly located and not blocked

Technician Only Check/replace inlet valve or pressure sensor

  1. Disconnect power
  2. Test water inlet valve operation and resistance with multimeter
  3. Inspect hydrostat/pressure sensor for faults
  4. Replace faulty parts as needed

Parts needed: water inlet valve, hydrostat/pressure sensor

🛑 When to Call a Pro:
  • After performing basic checks and cleaning if the i10 error persists
  • If any internal component testing or replacement is needed beyond user-level tasks
  • If water supply issues are confirmed but unresolved by household adjustments

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 10-20 ohms
part_number 154637401
voltage_rating 120V AC

Common Questions

What does i10 error mean on Electrolux dishwasher?

The i10 error indicates a water inlet issue, causing the dishwasher not to fill with water.

Can I fix Electrolux dishwasher i10 error myself?

Yes, you can perform basic checks like ensuring the water supply is on and cleaning the inlet hose filter.

How much does it cost to fix i10 error?

Estimated repair costs for the i10 error range from $50 to $200 for parts, plus labor.

When should I call a technician for i10?

Call a technician if the error persists after basic troubleshooting or if internal components need testing or replacement.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!