Danby Washer Dryer: excessive shaking during spin cycle
What is this symptom?
Experiencing excessive shaking during the spin cycle of your Danby Washer Dryer? This issue often leads to loud noises and can cause the unit to move. Common causes include an unbalanced load or leveling issues, while less frequent causes might involve wear on the tub bearings or balance ring fluid loss. Addressing these problems promptly can ensure smoother operation and extend the life of your appliance.
Important Tips for Danby Models
- Danby official troubleshooting lists unbalanced loads, leveling issues, and worn shock absorbers as primary causes for vibration during spin cycle.
Possible Causes
Unbalanced laundry load
How to Identify: Shaking occurs when washing bulky or unevenly loaded clothes; redistributing the load often reduces shaking.
Part: Drum/Load
Balance ring fluid loss
How to Identify: Visual inspection shows low or missing fluid in balance ring leading to poor damping.
Part: Balance ring
Tub bearings or drum support wear
How to Identify: Grinding noises, looseness when manually turning drum.
Part: Drum bearings / rear drum assembly
DIY Solutions
Redistribute laundry load
- Open washer drum and redistribute clothes evenly around the drum.
- Avoid washing single heavy items by adding other items to balance weight.
- Restart the spin cycle and observe for reduced shaking.
Level the washer dryer
- Place a bubble level on top of the machine to check for level front-to-back and side-to-side.
- Adjust the leveling legs by turning them until the machine sits evenly.
- Recheck with level and secure lock nuts if present.
Next step
Choose the next step for excessive shaking during spin cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Hard
- Estimated time
- 120-180 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dryer Drum Assembly
Forms the rotating drum that carries clothing through the drying cycle.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace shock absorbers or suspension components
Replace balance ring or tub bearings
When to Call a Professional
Preventive Maintenance
-
Check and adjust leveling legs: Vibration caused by uneven stance
Frequency: monthly -
Balance laundry loads: Unbalanced loading leading to shaking
Frequency: every wash
Frequently Asked Questions
Why is my Danby Washer Dryer excessive shaking during spin cycle?
How do I fix Danby Washer Dryer excessive shaking during spin cycle myself?
How much does it cost to fix excessive shaking during spin cycle?
When should I call a technician for excessive shaking during spin cycle?
References & Sources
- Danby FAQ on excessive vibration Official
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Shipping bolts not removed
- Unbalanced load
- Worn or damaged shock absorbers
User Suggested Solutions
-
Remove shipping bolts from the back of the washer dryer. Ensure the machine is unplugged, then locate the bolts and unscrew them. This should be done before the first use or if they were accidentally left in.
-
Redistribute the load evenly in the drum. Open the door, rearrange the clothes to ensure they are balanced, and run a short spin cycle to test stability.
-
Inspect and replace worn shock absorbers. Unplug the machine, remove the front panel, and check the shock absorbers for wear. Replace if necessary, following the manufacturer's instructions.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
shakes an insane amount during spin cycle
Shipping bolts were still in the back of the machine, causing excessive shaking.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!