Danby Washer Dryer Error E10
⚡ Quick Answer: The Danby Washer Dryer E10 error indicates a malfunction with the user interface or control panel, preventing the machine from starting. The control p... ✅ DIY Fixable
What Does Error E10 Mean?
The Danby Washer Dryer E10 error indicates a malfunction with the user interface or control panel, preventing the machine from starting. The control panel may light up, but buttons will not respond. This error often leads to the washer-dryer failing to fill the drum with water, usually due to faulty connections or a defective control board.
Common Symptoms:
- Washer‑dryer displays E10 and will not start
- Control panel lights but buttons do not respond
Possible Causes
- Faulty user interface / control panel or related connection (medium)
How to Fix Error E10
DIY Fix Basic user checks for control panel issues
- Disconnect power (unplug) and wait a few minutes
- Check if any buttons are stuck or non‑responsive
- Visually inspect the button panel area for signs of moisture or detergent residue
- Once dry, restore power and attempt to clear the error
Technician Only Inspect and repair control panel and connections
- Unplug the washer‑dryer and remove the control panel
- Inspect flat ribbon cable between user interface and main board for seating and damage
- Test control panel/buttons and replace panel or PCB if defective
- Verify no moisture damage within control housing
Parts needed: Control panel / user interface board, Ribbon cable / connectors
- If E10 persists after basic user checks
- If inspection reveals internal wiring damage or panel corrosion
- If user is uncomfortable performing disassembly
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Ribbon Cable
Carries low-voltage signals between a user interface, display, and electronic control board.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-20 ohms |
| part_number | DANBY-WATER-VALVE-001 |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on Danby Washer Dryer?
E10 indicates a control panel issue, preventing the washer-dryer from starting.
Can I fix Danby Washer Dryer E10 error myself?
Yes, start by unplugging the unit and checking for stuck buttons or moisture.
How much does it cost to fix E10 error?
Repair costs range from $80 to $250 for parts, depending on the model.
When should I call a technician for E10?
Call a technician if E10 persists after checks or if there’s visible damage.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!