Danby Washer Dryer Error E21
⚡ Quick Answer: The Danby Washer Dryer E21 error code signifies a drainage fault, often resulting in the machine halting mid-cycle with water still inside. This issue... ✅ DIY Fixable
What Does Error E21 Mean?
The Danby Washer Dryer E21 error code signifies a drainage fault, often resulting in the machine halting mid-cycle with water still inside. This issue can stem from a clogged drain pump filter, a blocked or kinked drain hose, or a malfunctioning drain pump. Users may notice unusual noises during operation as well.
Common Symptoms:
- Washer stops mid‑cycle with water remaining
- Machine unable to drain or slow drainage
- Error code appears on display
Possible Causes
- Clogged drain pump filter or obstruction in drainage path (medium)
- Blocked or kinked drain hose (medium)
- Faulty or obstructed drain pump (medium)
How to Fix Error E21
DIY Fix Check and clear drainage blockages
- Unplug the washer dryer
- Locate and clean the drain pump filter from rear access
- Inspect and straighten drain hose, removing any kinks
- Check that drain hose and standpipe are clear of debris
DIY Fix Reset the unit after clearing blockage
- After clearing drain blockages, unplug the unit for several minutes
- Reconnect power and run a drain/spin cycle to check if the error clears
Technician Only Inspect/replace drain pump
- Disconnect power and access the drain pump assembly
- Inspect pump impeller and housing for obstructions or wear
- Test pump electrical operation and continuity
- Replace pump if faulty
Parts needed: drain pump assembly
- If water leaks are present
- If error persists after clearing drain hose and filter
- If drain pump shows electrical failure or physical damage
Next step
Choose the next step for E21
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Danby 106063 |
| voltage_rating | 120V AC |
Common Questions
What does E21 error mean on Danby Washer Dryer?
E21 indicates a drainage fault where the washer stops mid-cycle with water remaining.
Can I fix Danby Washer Dryer E21 error myself?
Yes, check for blockages in the drain pump filter and hose, then reset the unit.
How much does it cost to fix E21 error?
Repair costs range from $50 to $150 for parts, depending on region and model.
When should I call a technician for E21?
Call if leaks occur, if the error persists after clearing blockages, or if the pump shows damage.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!