Beko Washing Machine: unusual noise
What is this symptom?
Is your Beko washing machine making unusual noises during wash or spin cycles? Sounds like rattling, grinding, or banging can indicate issues such as foreign objects in the drum, an uneven load, or even worn components. Addressing these concerns promptly can prevent further damage and maintain your machine's performance.
Important Tips for Beko Models
- Beko officially lists worn drum bearings and drive pulley as potential noise causes, and highlights load imbalance, foreign objects, and improper placement.
- Rhythmic rattling or knocking noise may be normal with heavy or uneven loads; check load before assuming malfunction.
Possible Causes
Foreign objects in drum
How to Identify: Rattling or irregular clattering sounds, often varies with load imbalance; objects like coins or small items visible in drum.
Part: Drum / interior
Uneven load or load imbalance
How to Identify: Noise during spin with banging or thudding, machine rocking or vibrating; noise often changes when load redistributed.
Part: Laundry load
Worn drum bearings or drive components
How to Identify: Grinding or loud continuous noise during drum spin, louder than typical operation; persists after removing load and balancing.
Part: Drum bearings / drive pulley
Loose motor mount or motor bearings wear
How to Identify: Rattling or vibration noise near motor area, especially during spin; may persist after checking drum and load.
Part: Motor assembly
Uneven installation or machine not level
How to Identify: Thudding or vibration noise particularly during spin, machine moves or vibrates on floor.
Part: Machine feet / placement
DIY Solutions
Remove foreign objects and rebalance load
- Stop machine and drain if needed.
- Open drum and inspect for foreign objects; remove coins, buttons, etc.
- Redistribute laundry evenly, add small items like towels to balance load if necessary.
- Run a short spin to check if noise reduced.
Level machine and adjust feet
- Check machine sits level using a spirit level placed on top.
- Adjust leveling feet by turning clockwise or counterclockwise until machine is stable.
- Test with spin cycle to see if noise reduced.
Next step
Choose the next step for unusual noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Hard
- Estimated time
- 120-180 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace worn drum bearings or drive pulley
Inspect and service motor mounts and motor bearings
When to Call a Professional
Preventive Maintenance
-
Check drum for objects before washing: Foreign-object noise and potential damage
Frequency: every load -
Ensure machine is level: Vibration and noise from uneven placement
Frequency: monthly check
Frequently Asked Questions
Why is my Beko Washing Machine unusual noise?
How do I fix Beko Washing Machine unusual noise myself?
How much does it cost to fix unusual noise?
When should I call a technician for unusual noise?
References & Sources
- Beko UK noisy washing machine FAQ Official
- Beko US washing machine troubleshooting Official
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged drum bearings
- Foreign objects stuck in the drum or pump
- Faulty or blocked drain pump
User Suggested Solutions
-
Inspect and replace drum bearings if worn. To do this, disconnect the washing machine, remove the back panel, and check for play in the drum. If there is excessive movement, replace the bearings.
-
Check for foreign objects in the drum or drain pump. Open the door and inspect the drum for any visible items. For the pump, remove the access panel, and clear any blockages found in the impeller.
-
Test the drain pump operation. Run a spin cycle and listen for unusual sounds. If the pump is not functioning properly, replace it. This involves disconnecting the power, removing the pump, and installing a new one.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
odd noise during last few minutes of wash
Check the drain pump and inspect the propeller for blockages; also consider drum bearings as a potential issue.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!