Beko Washing Machine Error E01

⚡ Quick Answer: The Beko washing machine E01 error code indicates a malfunction in the door lock mechanism, preventing the machine from starting. This issue may arise... ✅ DIY Fixable

What Does Error E01 Mean?

The Beko washing machine E01 error code indicates a malfunction in the door lock mechanism, preventing the machine from starting. This issue may arise if the door is not properly closed or latched, or it could be related to a water inlet failure. When the E01 error occurs, the wash cycle will not initiate, and the door lock indicator may flash, signaling that the door is not detected as securely locked. Ensure to check that the door is fully closed and that the water supply is adequate.

Common Symptoms:

  • Wash cycle will not start, machine unresponsive
  • Door lock indicator may flash (if door lock interpretation is correct)
  • Display stops operation shortly after starting

Possible Causes

  • Door lock mechanism failure / door not detected as locked (medium)
  • Water inlet failure / insufficient water supply (low)

How to Fix Error E01

DIY Fix Basic checks for E01 error

  1. Ensure the door is fully closed and latched properly before starting a cycle.
  2. Check that the water supply valves (hot/cold) are fully open and hoses are not kinked.
  3. Inspect inlet hoses for blockage and clean water inlet screens if accessible.
  4. Try powering off the machine, waiting ~5 minutes, then powering back on to see if the error clears.

Technician Only Inspect and test door lock assembly or water inlet components

  1. Test the door lock interlock switch and mechanism for continuity with proper diagnostic tools.
  2. Verify wiring and connectors for the door lock and control board.
  3. If door lock assembly is faulty, replace with OEM part specific to the model.
  4. If water inlet fault interpretation applies, test inlet valve operation and pressure; replace faulty inlet valve or pressure sensor as needed.

Parts needed: Door lock / interlock switch assembly, Water inlet valve and hose filters (if applicable), Multimeter for electrical diagnostics

🛑 When to Call a Pro:
  • If the error persists after basic user checks
  • If there is any sign of electrical damage or water leakage
  • If internal components need disassembly beyond user‑accessible parts

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Beko 280001234
voltage_rating 230V AC

Common Questions

What does E01 error mean on beko washing machine?

The E01 error indicates a malfunction in the door lock mechanism, causing the wash cycle to not start.

Can I fix beko washing machine E01 error myself?

Yes, check that the door is fully closed, ensure water supply valves are open, and inspect hoses for blockages.

How much does it cost to fix E01 error?

The estimated repair cost ranges from ¥5,000 to ¥25,000, depending on parts and service region.

When should I call a technician for E01?

Call a technician if the error persists after user checks or if there are signs of electrical damage or leaks.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!