Beko Washing Machine: not stopping after cycle completion

Professional Repair Guide

What is this symptom?

Is your Beko washing machine not stopping after completing its cycle? This issue may manifest as an unresponsive control panel, continuous drum rotation, or leftover water in the drum. Understanding the possible causes and solutions can help restore your appliance's functionality.

Urgency: Medium

Important Tips for Beko Models

  • Beko official troubleshooting focuses on water supply, inlet filters, and pump/filter cleanings for abnormal cycle behavior.

Possible Causes

Control board/electronic control malfunction

How to Identify: Machine stays running, cycles do not advance or finish even though program time has elapsed; unresponsive panel.

Part: Main control board / electronic control panel

Timer or cycle selector (for mechanical models)

How to Identify: Machine stuck on particular cycle setting and won’t advance to next; knob doesn’t move between steps.

Part: Mechanical timer / cycle selector

DIY Solutions

Reset the washing machine controls

Easy 10-15 minutes
  1. Turn off the washing machine.
  2. Unplug it from the wall socket for 5–10 minutes.
  3. Plug it back in and restart a simple cycle.
⚠️ Safety First: Ensure the machine is unplugged before resetting.

Clean pump filter and check drainage

Moderate 15-30 minutes
Tools Needed: Towel, Shallow tray
  1. Open the service flap at the bottom front.
  2. Place a tray under the filter access to catch water.
  3. Unscrew and remove the pump filter, clean debris and lint.
  4. Check drain hose for kinks or blockages.
⚠️ Safety First: Wear gloves; water may spill.

Check water inlet filters and hoses

Moderate 15-30 minutes
Tools Needed: Wrench, Small brush
  1. Turn off water supply and unplug machine.
  2. Disconnect water inlet hose from machine.
  3. Clean inlet filter of debris and reattach hose.
  4. Ensure hose is not kinked.
⚠️ Safety First: Turn off water before detaching hose.

Professional Repairs

Control board or electronic component replacement

Estimated Cost: $120 - $350

Timer or cycle selector repair/replacement (for mechanical models)

Estimated Cost: $80 - $200

When to Call a Professional

Symptom persists after cleaning filters and resetting controls
Error codes are displayed continuously
Unusual noises or electrical smell accompany the issue

Preventive Maintenance

  • Clean pump filter: Drain-related cycle interruptions
    Frequency: Every 1-3 months
  • Inspect and clean water inlet filters: Inlet restrictions causing cycle delays
    Frequency: Annually

Frequently Asked Questions

Why is my Beko Washing Machine not stopping after cycle completion?
Common causes include a malfunctioning control board or timer issues.
How do I fix Beko Washing Machine not stopping after cycle completion myself?
Try resetting the machine or cleaning the pump filter and inlet hoses.
How much does it cost to fix not stopping after cycle completion?
Professional repairs can range from $80 to $350, depending on the issue.
When should I call a technician for not stopping after cycle completion?
Contact a technician if DIY fixes don't work or if the issue is complex.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • The Anticrease function is active, causing the machine to continue tumbling.
  • Faulty door latch or door switch preventing the machine from recognizing the end of the cycle.
  • Control board malfunction, which may not send the stop signal to the motor.

User Suggested Solutions

  1. Check if the Anticrease function is active. To turn it off, simply press the 'Cancel' button or turn off the machine to reset it.

  2. Inspect the door latch and door switch for any damage or malfunction. If necessary, replace the door latch or switch to ensure proper cycle completion detection.

  3. Test the control board for faults. If the control board is malfunctioning, it may need to be replaced. This typically requires professional assistance.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Beko WUE7612XST Washing Machine Won't Stop After Program Fin...

Community Discussions

won't stop after program finishes

The Anticrease function may be active, causing the machine to continue tumbling after the cycle. Turning off the machine can cancel this function.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!