Fisher & Paykel Washing Machine Error F40

⚡ Quick Answer: The F40 error on Fisher & Paykel washing machines indicates a malfunction in the door lock mechanism, preventing the machine from starting or completi... ✅ DIY Fixable

What Does Error F40 Mean?

The F40 error on Fisher & Paykel washing machines indicates a malfunction in the door lock mechanism, preventing the machine from starting or completing cycles. Specifically, this fault occurs when the motor controller detects that the drum coupling is not engaged even though the pressure sensor shows the tub is empty. Symptoms include the washing machine stopping mid-cycle and the drum failing to engage properly, often requiring a check of the engagement mechanism or potential repair.

Common Symptoms:

  • Washing machine stops mid‑cycle and displays F40
  • Drum fails to engage properly even when water is drained
  • Cycle will not continue or complete

Possible Causes

  • Drum coupling or engagement mechanism failed or disconnected (medium)

How to Fix Error F40

DIY Fix Check load and reset

  1. Turn off and unplug the washing machine.
  2. Redistribute the laundry to ensure it’s not jammed or tangled.
  3. Plug the machine back in and restart a simple spin cycle to see if the code clears.

Technician Only Inspect and repair engagement mechanism

  1. Disconnect power and remove the rear access panel.
  2. Inspect the drum coupling, motor coupling, and related engagement components for wear, breakage or disconnection.
  3. Test the pressure sensor signal to confirm it correctly shows an empty tub.
  4. Replace any worn or broken mechanical coupling or engagement parts.
  5. Reassemble and test wash cycles to confirm the fault is resolved.

Parts needed: Drum/motor coupling, Engagement assembly, Pressure sensor (if misreporting)

🛑 When to Call a Pro:
  • If the F40 error persists after basic reset and load redistribution
  • If you observe unusual noises from the motor or drum engagement area
  • If the drum does not rotate smoothly by hand with power disconnected

Next step

Choose the next step for F40

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drive Motor

Drives the drum, agitator, or pump to rotate during cycles.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
45-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 500-1500 ohms
part_number 421021P
voltage_rating 240V AC

Common Questions

What does F40 error mean on fisher & paykel washing machine?

F40 means there's a door lock malfunction, preventing the machine from operating.

Can I fix fisher & paykel washing machine F40 error myself?

Yes, check load distribution and reset the machine by unplugging it, then restarting a spin cycle.

How much does it cost to fix F40 error?

Repair costs for the F40 error range from $80 to $250, depending on parts and labor.

When should I call a technician for F40?

Call a technician if the error persists after a reset or if you hear unusual noises from the drum.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!