Fisher & Paykel Washing Machine Error F8

⚡ Quick Answer: The Fisher & Paykel washing machine error code F8 typically indicates a failure in the door lock mechanism. This issue may prevent the washing machine... ✅ DIY Fixable

What Does Error F8 Mean?

The Fisher & Paykel washing machine error code F8 typically indicates a failure in the door lock mechanism. This issue may prevent the washing machine from starting and keep the door locked. To troubleshoot, check for any combined error codes on the display and consult your user manual for further insights.

Possible Causes

  • Door Lock Assembly
  • Wiring Issues
  • Control Board Malfunction

How to Fix Error F8

DIY Fix Check for related combined error codes (e.g., F8 with other digits)

  1. If the display shows more than just "F8" (e.g., F8 E1), note the full code.
  2. Consult your user manual for codes with combined identifiers.
  3. Search for the combined code on Fisher & Paykel official support or community resources.

Technician Only Refer to service documentation and diagnostics

  1. Access the specific service manual or diagnostic mode for the exact Fisher & Paykel model.
  2. Use diagnostic tools to read fault logs and electrical behavior.
  3. Inspect control board connections and sensor communication pathways.

Parts needed: Diagnostic tools, Model‑specific service manual

🛑 When to Call a Pro:
  • When the error persists after basic user‑level checks or if other combined error codes indicate a specific fault

Next step

Choose the next step for F8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number 421123P
voltage_rating 240V AC

Common Questions

What does F8 error mean on Fisher & Paykel washing machine?

The F8 error indicates a failure in the door lock mechanism, preventing the machine from starting.

Can I fix Fisher & Paykel washing machine F8 error myself?

Yes, check for combined error codes and consult your user manual for troubleshooting steps.

How much does it cost to fix F8 error?

Repair costs vary by model and region; specific estimates are not available.

When should I call a technician for F8?

Call a technician if the error persists after user-level checks or if other combined error codes indicate a fault.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!