Fisher & Paykel Washing Machine Error FA

⚡ Quick Answer: The FA error code on Fisher & Paykel washing machines typically indicates an issue with the door lock mechanism, which may result in the door not lock... ✅ DIY Fixable

What Does Error FA Mean?

The FA error code on Fisher & Paykel washing machines typically indicates an issue with the door lock mechanism, which may result in the door not locking or unlocking properly. This could prevent the machine from starting or completing cycles. To resolve this, it's essential to verify the model-specific error codes and refer to the user manual for troubleshooting steps.

Possible Causes

  • Door Lock Assembly

How to Fix Error FA

DIY Fix Verify Model‑Specific Error Codes

  1. Check your exact Fisher & Paykel washing machine model number (typically on the door frame or rear panel).
  2. Refer to the **model‑specific user manual** or fault‑code chart for that exact model. Official manuals may list error codes unique to that machine. turn
  3. If you cannot find "FA" in the manual, contact **Fisher & Paykel Support** directly with the model and error displayed.

Technician Only Contact Authorized Service

  1. Collect the exact model number and serial number of the washer.
  2. Contact Fisher & Paykel Authorized Service or Support with the error code "FA" and machine details.
  3. Have a technician check for **firmware/board communication issues** or uncommon fault codes not publicly documented.
🛑 When to Call a Pro:
  • If the error persists after checking manuals and basic checks (model verification, power reset).
  • If the machine ceases to operate normally with water filling, draining, or mechanical function affected.

Next step

Choose the next step for FA

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 10-20 ohms
part_number WH12X10462
voltage_rating 120V AC

Common Questions

What does FA error mean on fisher & paykel washing machine?

The FA error indicates a malfunction in the door lock mechanism.

Can I fix fisher & paykel washing machine FA error myself?

Yes, you can check the model's user manual for specific troubleshooting steps.

How much does it cost to fix FA error?

Repair costs vary by model and region; check with local service providers.

When should I call a technician for FA?

Call a technician if the error persists after basic checks and resets.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!