Fisher & Paykel Washing Machine Error F3
⚡ Quick Answer: The F3 error code on Fisher & Paykel washing machines typically indicates a malfunction with the motor controller module. This can prevent the machine... ⚠️ Difficulty Varies
What Does Error F3 Mean?
The F3 error code on Fisher & Paykel washing machines typically indicates a malfunction with the motor controller module. This can prevent the machine from filling or draining properly, resulting in the wash cycle being interrupted. Users may notice that the machine stops operation and displays the F3 error, often requiring a reset or inspection of the motor controller for resolution.
Common Symptoms:
- Washing machine stops operation and displays F3 error
- Machine may not proceed with wash or spin cycle
Possible Causes
- Motor controller module fault (low)
How to Fix Error F3
DIY Fix Basic checks and restart
- Turn off the washing machine and unplug it from the power source.
- Wait 1–2 minutes and plug it back in to perform a full reset.
- Ensure the load is balanced and the door is properly closed before restarting a wash cycle.
Technician Only Inspect or replace motor controller module
- Disconnect power and access the washer’s control compartment.
- Run diagnostics on the motor controller module to confirm error.
- Replace the motor controller module if confirmed faulty, following manufacturer or authorized service procedures.
Parts needed: Motor controller module, Associated wiring harness
- If F3 error persists after power cycling and basic checks
- If unusual noises, burning smells, or repeated faults occur
Next step
Choose the next step for F3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 1-5 ohms |
| part_number | 421733P |
| voltage_rating | 240V AC |
Common Questions
What does F3 error mean on Fisher & Paykel washing machine?
F3 error indicates a malfunction in the motor controller module, preventing proper operation.
Can I fix Fisher & Paykel washing machine F3 error myself?
Yes, start by power cycling the machine and ensuring the load is balanced.
How much does it cost to fix F3 error?
Repair costs typically range from moderate to high, depending on the model and region.
When should I call a technician for F3?
Call a technician if the F3 error persists after basic checks or if unusual noises occur.
Sources & References
- Washer - Front Load Models - Display Fault Codes (official)
- Fisher & Paykel Support Home (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!