Fisher & Paykel Washing Machine Error ERR49
⚡ Quick Answer: The Fisher & Paykel washing machine error code ERR49 indicates a fault in the cold water inlet valve or the door lock mechanism, causing the washer to... ✅ DIY Fixable
What Does Error ERR49 Mean?
The Fisher & Paykel washing machine error code ERR49 indicates a fault in the cold water inlet valve or the door lock mechanism, causing the washer to fail to detect cold water and preventing it from starting. Symptoms include continuous beeping, inability to complete cycles, and a cold water not detected indicator.
Common Symptoms:
- Continuous beeping on startup
- Washer not completing cycle and not detecting water fill
- Cold water not detected indicator
Possible Causes
- Cold water inlet valve fault or cold water not detected (medium)
- Wiring / connection fault to water inlet valves (medium)
- Potential control board/diagnostic circuit issue (low)
How to Fix Error ERR49
DIY Fix Check water supply and inlet hoses
- Ensure cold water tap is fully open
- Check that inlet hoses are not kinked or blocked
- Disconnect and inspect inlet hose filters for debris
DIY Fix Run basic troubleshooting
- Turn off washer at wall and wait one minute
- Turn machine back on to see if error clears
- Ensure machine is level and not overloaded
Technician Only Inspect and test water inlet valves and wiring
- Disconnect power
- Measure solenoid resistance on cold and hot inlet valves
- Verify voltage at inlet valve during fill attempt
- Inspect wiring harness for damage or poor connections
Parts needed: Water inlet valve assembly, Wiring harness
- If error persists after inspecting water supply and valves
- If internal wiring or control board fault is suspected
Next step
Choose the next step for ERR49
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | Fisher & Paykel 421162P |
| voltage_rating | 240V AC |
Common Questions
What does ERR49 error mean on Fisher & Paykel washing machine?
ERR49 indicates a malfunction in the cold water inlet valve or door lock, preventing the washer from starting.
Can I fix Fisher & Paykel washing machine ERR49 error myself?
Yes, check the water supply, inlet hoses, and run basic troubleshooting like resetting the machine.
How much does it cost to fix ERR49 error?
The estimated cost to fix the ERR49 error ranges from $50 to $200 for valve parts.
When should I call a technician for ERR49?
Call a technician if the error persists after checking water supply or if you suspect internal wiring or control board issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!