Fisher & Paykel Washing Machine Error ERR36

⚡ Quick Answer: The Fisher & Paykel washing machine ERR36 error indicates an issue with the drain pump, often resulting in unusual noises and the machine's failure to... ✅ DIY Fixable

What Does Error ERR36 Mean?

The Fisher & Paykel washing machine ERR36 error indicates an issue with the drain pump, often resulting in unusual noises and the machine's failure to drain water. This error may occur due to repeated triggers for water level top-up, possibly caused by water siphoning or a leak. Users may notice that the machine stops mid-cycle and attempts to add water during wash or rinse cycles.

Common Symptoms:

  • Machine stops mid cycle with error display ERR36
  • Washer repeatedly attempts to add water during wash/rinse

Possible Causes

  • Water siphoning or leak causing repeated need to top up water level (low)

How to Fix Error ERR36

DIY Fix Check water drainage and hoses

  1. Ensure drain hose is installed at correct height and not too low (avoid siphoning)
  2. Inspect hoses for kinks, disconnections, or visible leaks
  3. Check around machine base for signs of water leakage

Technician Only Pressure tube and leak diagnostics

  1. Verify pressure tube for correct fit and no holes or blockages
  2. Use service diagnostic mode to monitor water levels and control responses
  3. Inspect internal seals and water inlet/drain paths for unnoticed leaks

Parts needed: Pressure tube, Hose clamps, Seals/gaskets if leak identified

🛑 When to Call a Pro:
  • Visible water leaking from machine casing
  • Error persists after correcting hoses and drain height
  • Unusual noises or repeated top‑up attempts during cycles

Next step

Choose the next step for ERR36

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number 421021P
voltage_rating 120V AC

Common Questions

What does ERR36 error mean on Fisher & Paykel washing machine?

The ERR36 error indicates a drain pump malfunction, causing the machine to stop mid-cycle and attempt repeated water top-ups.

Can I fix Fisher & Paykel washing machine ERR36 error myself?

Yes, check the drain hose for proper height, kinks, and leaks. Ensure there are no obstructions.

How much does it cost to fix ERR36 error?

Estimated repair costs range from $50 to $200+, depending on parts and labor involved.

When should I call a technician for ERR36?

Call a technician if you see visible leaks, if the error persists after checking hoses, or if you hear unusual noises.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!