Fisher & Paykel Washing Machine Error ERR3

⚡ Quick Answer: The Fisher & Paykel washing machine ERR3 error indicates a drainage issue. This error often prevents the machine from completing its cycles and is typ... ✅ DIY Fixable

What Does Error ERR3 Mean?

The Fisher & Paykel washing machine ERR3 error indicates a drainage issue. This error often prevents the machine from completing its cycles and is typically signaled by a flashing error light. Common causes may include blockages in the drain hose or pump filter, or issues with power stability. It's essential to ensure the door is securely closed and to perform basic checks before seeking further assistance.

Possible Causes

  • Blocked drain filter
  • Faulty drain pump
  • Kinked drain hose

How to Fix Error ERR3

DIY Fix Verify manufacturer documentation

  1. Visit the official Fisher & Paykel support site and search for your exact model’s error codes.
  2. Check the washer’s user manual for model‑specific fault code descriptions.
  3. If the official fault code table does not include ERR3, contact Fisher & Paykel support for clarification.

DIY Fix Basic checks if ERR3 appears

  1. Ensure power to the washer is stable and properly connected.
  2. Check that the door is fully closed and latched before starting a cycle.
  3. Inspect drain hose and pump filter for blockages (clean if accessible and safe to do so).
  4. Ensure water supply hoses are connected and not kinked.
🛑 When to Call a Pro:
  • If error persists after basic checks.
  • If the code is illuminated during a cycle and you cannot find official guidance on its meaning.
  • If any unusual noises or water leak occur with the error displayed.

Next step

Choose the next step for ERR3

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 100W
component Drain Pump
resistance 20-30 ohms
part_number FPW1000PUMP
voltage_rating 240V AC

Common Questions

What does ERR3 error mean on Fisher & Paykel washing machine?

ERR3 indicates a drainage issue, preventing the machine from completing cycles.

Can I fix Fisher & Paykel washing machine ERR3 error myself?

Yes, check the drain hose and pump filter for blockages and ensure the door is securely closed.

How much does it cost to fix ERR3 error?

Repair costs vary by model and region, depending on the specific issue.

When should I call a technician for ERR3?

Call a technician if the error persists after basic checks or if unusual noises or leaks occur.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!