Fisher & Paykel Washing Machine Error ERR12
⚡ Quick Answer: The Fisher & Paykel washing machine ERR12 error indicates a drainage issue, typically characterized by the machine spinning without fully draining wat... ✅ DIY Fixable
What Does Error ERR12 Mean?
The Fisher & Paykel washing machine ERR12 error indicates a drainage issue, typically characterized by the machine spinning without fully draining water. This error often results in a loud humming sound and the wash cycle failing to complete. Common causes may include a blocked drain hose or lint trap, necessitating inspection and cleaning.
Common Symptoms:
- Wash cycle stops or fails to complete
- Machine spins but water doesn’t fully drain
- Error code displayed on control panel
Possible Causes
- Blocked drain filter
- Faulty drain pump
- Kinked drain hose
How to Fix Error ERR12
DIY Fix Check drain hose and filter
- Power off and unplug the machine
- Check that the drain hose is not kinked, blocked or positioned too high
- Clean any accessible lint trap or filter according to your model’s user guide
Technician Only Inspect and service drain pump system
- Disconnect power and access internal drain pump assembly
- Check for obstructions in the pump and impeller
- Test pump electrical operation and continuity
- Replace drain pump if physically damaged or electrically faulty
Parts needed: drain pump, hose clamps, pressure switch (if applicable)
- If draining issues persist after checking hoses and filter
- If water leaks when accessing internal components
- If machine displays additional error codes or fails diagnostics
Next step
Choose the next step for ERR12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | FP-DRN-PMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does ERR12 error mean on Fisher & Paykel washing machine?
ERR12 signifies a drainage issue where the machine spins but doesn't fully drain.
Can I fix Fisher & Paykel washing machine ERR12 error myself?
Yes, check the drain hose for kinks or blockages and clean the lint trap.
How much does it cost to fix ERR12 error?
Estimated repair costs range from $100 to $300, depending on parts and labor.
When should I call a technician for ERR12?
Call a technician if the issue persists after checking hoses or if water leaks occur.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!