Fisher & Paykel Washing Machine Error ERR10

⚡ Quick Answer: The Fisher & Paykel washing machine error code ERR10 indicates a malfunction in the door lock mechanism. This error often results in the door remainin... ✅ DIY Fixable

What Does Error ERR10 Mean?

The Fisher & Paykel washing machine error code ERR10 indicates a malfunction in the door lock mechanism. This error often results in the door remaining locked and a persistent error message displayed on the control panel. To address this issue, users should first perform basic troubleshooting steps and consult the user manual specific to their model.

Possible Causes

  • Door Lock Mechanism
  • Control Board
  • Wiring Issues

How to Fix Error ERR10

DIY Fix Check Official Documentation

  1. Locate the exact model number of your Fisher & Paykel washing machine.
  2. Visit the official Fisher & Paykel support site to download the user manual or fault code chart for your specific model.
  3. Search the downloaded documentation for the specific error code ‘ERR10’.

DIY Fix General Troubleshooting Steps

  1. Power‑cycle the washer: turn off power at the wall, wait 1 minute and restart.
  2. Check that the washer is level and not overloaded.
  3. Ensure there are no obvious blockages to drainage or inlet hoses.

Technician Only Contact Fisher & Paykel Support

  1. If the code persists and no documentation defines ERR10, contact Fisher & Paykel support and provide model number and error code details.
  2. Authorised service technicians can access internal fault code tables or diagnostic tools.
  3. Diagnose using official service software or parts manuals.
🛑 When to Call a Pro:
  • If the error remains after basic checks and documentation review.
  • If the washer shows additional symptoms (no water fill, no spin, locked door, etc.).

Next step

Choose the next step for ERR10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Mechanism
resistance 1-5 ohms
part_number FPWASHLOCK123
voltage_rating 240V AC

Common Questions

What does ERR10 error mean on fisher & paykel washing machine?

ERR10 indicates a malfunction in the door lock mechanism, causing the door to stay locked.

Can I fix fisher & paykel washing machine ERR10 error myself?

Yes, you can try power-cycling the washer and checking for blockages.

How much does it cost to fix ERR10 error?

Repair costs vary by region and service call; it's best to consult local technicians.

When should I call a technician for ERR10?

Call a technician if the error persists after troubleshooting or if additional symptoms occur.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!