Fisher & Paykel Washing Machine Error EE

⚡ Quick Answer: The 'EE' error code on Fisher & Paykel washing machines indicates a malfunction in the door lock mechanism, which can prevent the door from opening or... ✅ DIY Fixable

What Does Error EE Mean?

The 'EE' error code on Fisher & Paykel washing machines indicates a malfunction in the door lock mechanism, which can prevent the door from opening or closing properly. This issue may stem from problems within the control board or electrical components, requiring inspection and potential replacement of parts for resolution.

Possible Causes

  • Door Lock Assembly
  • Control Board
  • Wiring Issues

How to Fix Error EE

DIY Fix Check for Control/Display Anomalies and Perform Basic Reset

  1. Turn off the washing machine and unplug it from power.
  2. Wait at least 2 minutes for residual charge to dissipate.
  3. Plug the machine back in and attempt to restart a cycle.
  4. Observe if the 'EE' code persists or if normal operation resumes.

Technician Only Inspect Main Control Board and EEPROM

  1. Access the internal control assembly of the washer.
  2. Check for faults or damage on the main PCB board.
  3. Test or swap the EEPROM/microcontroller components if available.
  4. Replace the main control board if EEPROM issues are confirmed.

Parts needed: Main control PCB, EEPROM/microcontroller

🛑 When to Call a Pro:
  • If the 'EE' code persists after power cycling and basic resets.
  • If multiple components inside the control board exhibit signs of damage (burn marks, corrosion).
  • If you are not experienced with electrical diagnostics and board-level repair.

Next step

Choose the next step for EE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number 421256P
voltage_rating 240V AC

Common Questions

What does EE error mean on Fisher & Paykel washing machine?

The EE error indicates a malfunction in the door lock mechanism, affecting door operation.

Can I fix Fisher & Paykel washing machine EE error myself?

Yes, you can perform a basic reset by unplugging the machine for 2 minutes and then restarting it.

How much does it cost to fix EE error?

The estimated repair cost ranges from $150 to $450, depending on parts and labor.

When should I call a technician for EE?

Call a technician if the error persists after resetting, or if you see damage inside the control board.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!