Fisher & Paykel Washing Machine Error E5
⚡ Quick Answer: The E5 error code on your Fisher & Paykel washing machine indicates a drain pump failure, often resulting in a humming sound and failure to drain wate... ✅ DIY Fixable
What Does Error E5 Mean?
The E5 error code on your Fisher & Paykel washing machine indicates a drain pump failure, often resulting in a humming sound and failure to drain water from the drum. This issue may arise from a blocked or kinked pressure tube, a faulty pressure sensor, or an air leak in the pressure hose connection, preventing the machine from advancing in the wash cycle.
Common Symptoms:
- Washer displays E5 and does not advance in the cycle
- Machine may stop during fill or wash phase
Possible Causes
- Blocked or kinked pressure tube between tub and pressure sensor (medium)
- Faulty pressure sensor (water level sensor) (medium)
- Air leak in pressure hose connection (medium)
How to Fix Error E5
DIY Fix Check and clear pressure hose
- Unplug the washing machine from power.
- Locate the small pressure hose running from the outer tub to the pressure sensor or control board.
- Ensure the hose is securely fitted at both ends and not pinched or kinked.
- Remove the hose from the tub end and blow gently to check for blockages; clear any debris.
- Reattach the hose securely and restore power to test.
Technician Only Test and replace pressure sensor
- Disconnect power and access the internal control area.
- Using appropriate diagnostic tools, test the pressure sensor’s continuity and response to applied pressure.
- If faulty, replace the pressure sensor with Fisher & Paykel specified part.
- Reassemble machine and verify the error code does not return.
Parts needed: pressure sensor / water level sensor, pressure hose
- If the E5 error persists after checking and clearing pressure hose
- If you are uncomfortable accessing internal components or testing sensors
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 80W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | 421185P |
| voltage_rating | 240V AC |
Common Questions
What does E5 error mean on fisher & paykel washing machine?
E5 indicates a drain pump failure, causing the washer to stop and not drain water.
Can I fix fisher & paykel washing machine E5 error myself?
Yes, you can check and clear the pressure hose for blockages or kinks.
How much does it cost to fix E5 error?
Estimated repair costs for the E5 error range from ¥5,000 to ¥20,000+, depending on parts and labor.
When should I call a technician for E5?
Call a technician if the E5 error persists after checking the pressure hose or if you are uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!