Fisher & Paykel Washing Machine Error E2

⚡ Quick Answer: The Fisher & Paykel washing machine E2 error indicates a drainage issue where water remains in the drum, causing the washing cycle to pause or fail. T... ✅ DIY Fixable

What Does Error E2 Mean?

The Fisher & Paykel washing machine E2 error indicates a drainage issue where water remains in the drum, causing the washing cycle to pause or fail. This error often occurs due to a blocked or kinked drain hose, a clogged drain pump filter, or a faulty drain pump. Addressing these components can help resolve the issue and restore proper functionality.

Common Symptoms:

  • Water remains in drum
  • Washing cycle pauses or fails to advance
  • Machine attempts to drain but shows error

Possible Causes

  • Blocked or kinked drain hose (medium)
  • Clogged drain pump filter or debris in pump (medium)
  • Faulty drain pump (medium)

How to Fix Error E2

DIY Fix Check basic drainage components

  1. Unplug the machine.
  2. Inspect the drain hose for kinks or blockages; straighten and clear if needed.
  3. Access and clean the drain pump filter: place towels and open filter to remove lint/debris.
  4. Reassemble and test a drain/spin cycle.

Technician Only Diagnose and replace faulty pump

  1. Disconnect power and water.
  2. Remove access panels to reach drain pump.
  3. Test pump impeller and operation; if faulty, disconnect wiring and hoses.
  4. Install a compatible replacement pump.
  5. Reassemble and verify proper drainage.
  6. Test machine through full cycle.

Parts needed: drain pump assembly, hose clamps, possible gasket or filter parts

🛑 When to Call a Pro:
  • If water persists after clearing hose and filter
  • If pump impeller does not turn or makes unusual noise
  • If electrical faults or water leaks are present

Next step

Choose the next step for E2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 20-30 ohms
part_number FP-DRN-PMP-001
voltage_rating 240V AC

Common Questions

What does E2 error mean on fisher & paykel washing machine?

E2 error indicates that the washing machine is experiencing a drainage issue, often resulting in water remaining in the drum.

Can I fix fisher & paykel washing machine E2 error myself?

Yes, you can check for kinks in the drain hose and clean the drain pump filter to potentially resolve the E2 error.

How much does it cost to fix E2 error?

The estimated cost to fix the E2 error ranges from $80 to $250, including parts and labor.

When should I call a technician for E2?

Call a technician if water persists after clearing the hose and filter, the pump impeller doesn't turn, or if you notice electrical faults or leaks.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!