Fisher & Paykel Oven Error F10

⚡ Quick Answer: The Fisher & Paykel oven error F10 indicates a clock or timer configuration fault, preventing normal operation. When this error appears, the oven cont... ✅ DIY Fixable

What Does Error F10 Mean?

The Fisher & Paykel oven error F10 indicates a clock or timer configuration fault, preventing normal operation. When this error appears, the oven control panel displays F10, and the clock or timer fails to accept settings, resulting in the oven not starting cooking functions. This issue may stem from a glitch in the control electronics or a failure of the user interface.

Common Symptoms:

  • Display shows F10 on oven control panel
  • Clock and/or timer will not accept settings
  • Oven refuses to start cooking functions

Possible Causes

  • Clock/Timer configuration fault or control electronics glitch (medium)
  • User interface or button failure preventing time setting (low)

How to Fix Error F10

DIY Fix Attempt power reset and clock setup

  1. Turn off power to the oven at the circuit breaker or unplug for ~10 minutes
  2. Restore power
  3. Immediately set the correct clock time and date as per user manual instructions
  4. Try running a basic cooking function to confirm the error is cleared

Technician Only Inspect and repair electronic control and UI

  1. Verify UI buttons and touch panel responsiveness
  2. Check continuity and function of clock/timer related switches or inputs
  3. Test main control board’s clock circuit and related components
  4. Replace faulty UI panel or control board if components fail diagnostics

Parts needed: control board, UI touch panel/buttons

🛑 When to Call a Pro:
  • If clock/timer cannot be set after reset
  • If UI buttons are unresponsive or intermittent
  • If oven still displays F10 after performing power reset and correct time configuration

Next step

Choose the next step for F10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1200 ohms
part_number Fisher & Paykel 5304503086
voltage_rating 240V AC

Common Questions

What does F10 error mean on fisher & paykel oven?

F10 indicates a clock or timer configuration fault, preventing the oven from operating.

Can I fix fisher & paykel oven F10 error myself?

Yes, you can attempt a power reset and set the clock according to the user manual.

How much does it cost to fix F10 error?

$150–$500+, depending on parts and labor for repairs.

When should I call a technician for F10?

Call a technician if the clock/timer cannot be set after a reset or if UI buttons are unresponsive.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!