Fisher & Paykel Oven Error F20

⚡ Quick Answer: The Fisher & Paykel oven error F20 indicates a malfunction in the touch panel or user interface key matrix, leading to unresponsive controls and errat... ✅ DIY Fixable

What Does Error F20 Mean?

The Fisher & Paykel oven error F20 indicates a malfunction in the touch panel or user interface key matrix, leading to unresponsive controls and erratic temperature readings. This may result from a faulty key matrix or moisture behind the panel, causing the oven to fail to respond to touch inputs even when the display is lit.

Common Symptoms:

  • Oven display shows F20
  • Oven will not respond to any touch inputs despite display being lit
  • Controls unresponsive

Possible Causes

  • Faulty touch panel key matrix or UI interface (medium)
  • Shorted or stuck touch key / liquid ingress behind panel (low)

How to Fix Error F20

DIY Fix Basic checks and panel drying

  1. Disconnect power to the oven at the wall outlet.
  2. Wipe the touch panel with a dry, soft cloth to remove residue or moisture.
  3. If the fault occurred after cleaning or moisture presence, leave oven powered off with door open for several hours to allow behind‑panel moisture to evaporate.
  4. Reconnect power and check if touch controls respond.

Technician Only Inspect and repair touch control assembly

  1. Disconnect power at the breaker and ensure the oven is fully de‑energized.
  2. Remove the control panel assembly.
  3. Inspect the UI PCB (user interface printed circuit board) for corrosion, damage, or liquid ingress.
  4. Test the touch key matrix and associated circuitry with appropriate tools (multimeter/diagnostic tester).
  5. Replace the touch panel assembly or UI PCB if damaged or non‑responsive.
  6. Reassemble and test the control panel.
  7. Restore power and verify error resolution.

Parts needed: Touch control panel / glass assembly, UI PCB (user interface board)

🛑 When to Call a Pro:
  • If error persists after basic drying and cleaning steps
  • If internal inspection reveals damaged circuitry or components requiring replacement

Next step

Choose the next step for F20

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

User Interface Board

Receives button or touch input and controls the appliance display and indicators.

Typical part-only price
$70 - $220
DIY difficulty
Medium
Estimated time
20-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number BPX600
voltage_rating 240V AC

Common Questions

What does F20 error mean on fisher & paykel oven?

F20 error indicates a touch panel malfunction, resulting in unresponsive controls and erratic temperature readings.

Can I fix fisher & paykel oven F20 error myself?

Yes, you can perform basic checks by disconnecting power, drying the panel, and ensuring there is no moisture.

How much does it cost to fix F20 error?

Repair costs for the F20 error typically range from $150 to $400, depending on parts and labor.

When should I call a technician for F20?

Call a technician if the error persists after basic checks or if internal inspection reveals damaged components.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!