Fisher & Paykel Oven Error F19
⚡ Quick Answer: The Fisher & Paykel oven error F19 signifies an earth leakage or short circuit fault, typically triggered when a heating function is selected. This re... ✅ DIY Fixable
What Does Error F19 Mean?
The Fisher & Paykel oven error F19 signifies an earth leakage or short circuit fault, typically triggered when a heating function is selected. This results in the display showing F19, the household circuit breaker tripping, and heating elements failing to engage. It's essential to disconnect the oven from mains power immediately if the breaker trips repeatedly and to check for moisture or inadequate household wiring.
Common Symptoms:
- Display shows F19
- Household circuit breaker trips when selecting a heating function
- Heating elements not engaging
Possible Causes
- Earth leakage or short circuit when heating elements engage (medium)
- Insulation breakdown or wiring short to chassis (low)
How to Fix Error F19
DIY Fix Initial safety checks and simple troubleshooting
- Disconnect the oven from mains power immediately if it trips the breaker repeatedly.
- Ensure the oven is completely dry inside if recently cleaned, and allow moisture to evaporate.
- Check that the circuit breaker and household wiring are adequate and not the cause of repeated trips.
Technician Only Diagnose and repair earth leakage / short circuit
- Disconnect power and inspect internal wiring harnesses and heating elements for signs of arcing, burned insulation, or pinched wires.
- Measure insulation resistance of heating elements to earth using a megger; replace any elements showing low resistance.
- Inspect and replace any damaged mains filter/suppression components if present.
Parts needed: Heating elements, Insulation/wiring harnesses, Mains filter/suppression components
- If the oven continues to trip the circuit breaker after disconnecting and drying, and you are not trained in high-voltage appliance repair
- If insulation resistance tests indicate leakage but you cannot safely replace parts
Next step
Choose the next step for F19
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | Part # 5304502028 |
| voltage_rating | 240V AC |
Common Questions
What does F19 error mean on Fisher & Paykel oven?
F19 indicates an earth leakage or short circuit fault, causing the circuit breaker to trip when heating is selected.
Can I fix Fisher & Paykel oven F19 error myself?
Yes, start with safety checks: disconnect power, check for moisture, and ensure household wiring is adequate.
How much does it cost to fix F19 error?
Estimated repair costs range from $100 to $400+, depending on parts and labor needed.
When should I call a technician for F19?
Call a technician if the breaker continues to trip after troubleshooting, or if you are not trained in high-voltage repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!