Fisher & Paykel Oven Error F16
⚡ Quick Answer: The Fisher & Paykel oven error code F16 indicates a fault in the lower bake element circuit, which prevents the element from heating properly. This ca... ✅ DIY Fixable
What Does Error F16 Mean?
The Fisher & Paykel oven error code F16 indicates a fault in the lower bake element circuit, which prevents the element from heating properly. This can lead to inconsistent oven temperatures and poor baking results. Common causes include a failed lower bake element, loose connections, or damaged wiring. To troubleshoot, check if the lower bake element glows during operation and inspect for any visible damage.
Common Symptoms:
- Oven display shows F16
- Lower bake element does not heat while other functions may still operate
Possible Causes
- Open or failed lower bake element (medium)
- Loose or burnt connection at the lower element or harness wiring damage (medium)
How to Fix Error F16
DIY Fix Basic checks and reset
- Turn off the oven and disconnect power at the mains.
- Allow the oven to cool completely.
- Inspect the oven cavity to confirm the lower bake element is not visibly glowing or heating during a bake cycle.
Technician Only Diagnose and repair lower bake element circuit
- Disconnect oven from power and access the rear or bottom of the appliance.
- Remove access panels to reach the lower bake element terminals.
- Test the lower bake element for continuity with a multimeter; replace element if open.
- Inspect wiring from lower element to control board for damage or loose connectors; repair or replace wiring as needed.
- If element and wiring are intact, test or replace the control board bake relay associated with the lower element circuit.
Parts needed: Lower bake element, Wiring harness/connectors, Control board (bake relay)
- If you are not comfortable working with electrical appliances or if basic inspections do not identify the fault, contact an authorized Fisher & Paykel technician.
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2500W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Fisher & Paykel 530450 |
| voltage_rating | 240V AC |
Common Questions
What does F16 error mean on fisher & paykel oven?
The F16 error indicates a malfunction in the lower bake element circuit, causing heating issues.
Can I fix fisher & paykel oven F16 error myself?
Yes, you can perform basic checks like inspecting the lower bake element and resetting the oven.
How much does it cost to fix F16 error?
Repair costs range from $100 to $400+, depending on parts and service labor.
When should I call a technician for F16?
Call a technician if you're uncomfortable with electrical repairs or if basic troubleshooting fails.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!