Fisher & Paykel Oven Error F06
⚡ Quick Answer: The Fisher & Paykel oven error code F06 indicates a malfunction in the user interface, specifically a communication fault between the touch panel and ... ✅ DIY Fixable
What Does Error F06 Mean?
The Fisher & Paykel oven error code F06 indicates a malfunction in the user interface, specifically a communication fault between the touch panel and the main control board. This may result in the oven displaying the F06 error, with controls becoming unresponsive or erratic. To troubleshoot, consider performing a basic reset by disconnecting power to the oven for a few minutes. If the issue persists, further inspection of the user interface components may be necessary.
Common Symptoms:
- F06 displayed on the oven control panel
- Touch controls or selector knob unresponsive or show erratic behavior
Possible Causes
- User interface / touch panel communication fault (medium)
How to Fix Error F06
DIY Fix Basic Reset and Check Controls
- Ensure the touch control area is completely dry before using.
- Turn off the oven and disconnect power at the circuit breaker for a few minutes, then restore power to see if the error clears.
Technician Only Inspect and Repair UI Communication Components
- Disconnect power at the breaker before servicing.
- Access the control panel and inspect the connection between the touch UI and main control board.
- Reseat or replace the ribbon cable/connectors if loose or corroded.
- Replace the user interface panel or main control board if inspection shows damage or faults.
Parts needed: User Interface / Touch Panel Assembly, Ribbon cable/connectors, Main control board
- If F06 persists after basic reset and controls remain unresponsive.
- If visible damage (burn marks/moisture) is found on control electronics.
- If you are not comfortable performing panel-level diagnostics.
Next step
Choose the next step for F06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Ribbon Cable
Carries low-voltage signals between a user interface, display, and electronic control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000 ohms at 25°C |
| part_number | BP36000 |
| voltage_rating | 240V AC |
Common Questions
What does F06 error mean on Fisher & Paykel oven?
F06 indicates a communication fault in the user interface, causing erratic or unresponsive controls.
Can I fix Fisher & Paykel oven F06 error myself?
Yes, you can perform a basic reset by turning off the oven and disconnecting power for a few minutes.
How much does it cost to fix F06 error?
The estimated repair cost is medium, varying based on the parts replaced and labor required.
When should I call a technician for F06?
Call a technician if the F06 error persists after a reset, or if you find visible damage on the control electronics.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!