Fisher & Paykel Oven Error F04
⚡ Quick Answer: The Fisher & Paykel oven error F04 indicates a malfunction in the cooling fan system, often leading to continuous fan operation or failure to run when... ✅ DIY Fixable
What Does Error F04 Mean?
The Fisher & Paykel oven error F04 indicates a malfunction in the cooling fan system, often leading to continuous fan operation or failure to run when needed. This can cause erratic temperature readings and may disable heating functions until the fault is resolved. Regularly check for blockages around the fan and inspect the cooling fan motor for potential failure.
Common Symptoms:
- Error F04 displayed on oven panel
- Cooling fan runs continuously or does not run when oven is hot
- Oven may shut off or disable heating functions until fault clears
Possible Causes
- Cooling fan motor failure (medium)
- Obstruction or blockage of cooling fan (medium)
- Faulty control board output to fan (triac or relay) (low)
How to Fix Error F04
DIY Fix Basic checks before service call
- Turn the oven off and allow it to cool.
- Ensure vents and fan areas are not blocked by debris, grease or oven racks.
- Switch power off at mains for at least 10 seconds then restore to see if code clears.
- If comfortable, listen during a heating cycle to determine if the fan runs or makes abnormal noise.
Technician Only Cooling fan motor inspection and replacement
- Disconnect power to oven.
- Remove oven from cabinetry if needed and access rear or top panel to reach the cooling fan assembly.
- Inspect cooling fan blades and motor for obstruction, damage or seizure.
- Test fan motor resistance and operation with multimeter; replace motor if failed.
- Check wiring harness and control board output to fan; repair or replace defective wiring or board components as needed.
Parts needed: Cooling fan motor assembly, Possible control board output components (triac/relay)
- If fan does not run after basic checks and reset
- If error reappears repeatedly after power cycling
- If you are uncomfortable accessing internal oven components
Next step
Choose the next step for F04
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Cooling Fan Motor
Moves cooling air around hot cooking components and electronic controls.
- Typical part-only price
- $35 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-75 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | BPX60-1 |
| voltage_rating | 240V AC |
Common Questions
What does F04 error mean on Fisher & Paykel oven?
F04 indicates a cooling fan malfunction affecting temperature readings and oven performance.
Can I fix Fisher & Paykel oven F04 error myself?
Yes, check for blockages and try resetting the oven by turning it off for 10 seconds.
How much does it cost to fix F04 error?
Repair costs range from $120–$350 for the cooling fan motor assembly, plus labor.
When should I call a technician for F04?
Call a technician if the fan doesn't run after basic checks or if the error persists.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!