Fisher & Paykel Oven Error F02
⚡ Quick Answer: The Fisher & Paykel oven error code F02 indicates a malfunction related to the oven's temperature sensor, often leading to erratic temperature reading... ⚠️ Difficulty Varies
What Does Error F02 Mean?
The Fisher & Paykel oven error code F02 indicates a malfunction related to the oven's temperature sensor, often leading to erratic temperature readings and potential overheating. This error typically arises during or after cooking or self-cleaning cycles, resulting in the oven shutting down or displaying an over-temperature warning. If the oven temperature exceeds the set point, it may indicate a faulty temperature sensor or an uncontrolled internal heating condition.
Common Symptoms:
- Display shows F02 during or after a cooking/self‑clean cycle
- Oven shuts down with an over‑temperature warning
- Oven temperature continues to rise above set temperature
Possible Causes
- Oven temperature sensor out of range or reporting incorrect temperature (medium)
- Actual overheat condition due to internal heating circuit running uncontrolled (medium)
How to Fix Error F02
DIY Fix Power cycle and check oven cooling
- Turn the oven off at the main power switch or circuit breaker.
- Wait for the oven to cool completely.
- After full cooldown, restore power and test basic heating at a low temperature.
Technician Only Test and/or replace temperature sensor and verify heating control
- Disconnect power at the electrical supply.
- Access and test the oven temperature sensor with a multimeter for correct resistance at room temperature.
- Inspect heating elements and control circuits for signs of failure or short.
- Replace faulty temperature sensor or control module as needed.
Parts needed: Oven temperature sensor, Oven control board / power module, Heating element (if related issues are found during testing)
- If the oven continues to display F02 after cooldown and power cycle.
- If temperature sensor testing shows erratic or out‑of‑range values.
- If other fault codes accompany F02 or the oven fails to heat/cool properly.
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000 ohms at room temperature |
| part_number | BPX600 |
| voltage_rating | 240V AC |
Common Questions
What does F02 error mean on fisher & paykel oven?
F02 indicates a temperature sensor malfunction, causing erratic readings and potential overheating.
Can I fix fisher & paykel oven F02 error myself?
Yes, you can power cycle the oven and check for cooling, but further testing may require a technician.
How much does it cost to fix F02 error?
Repair costs for the F02 error can be moderate to high, depending on whether parts like the temperature sensor or control board need replacement.
When should I call a technician for F02?
Call a technician if the F02 error persists after cooldown, if the sensor tests show erratic values, or if other fault codes appear.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!