Fisher & Paykel Oven Error C1

⚡ Quick Answer: The Fisher & Paykel oven C1 error indicates a malfunction in the temperature sensor, leading to erratic temperature readings and potential overheating... ✅ DIY Fixable

What Does Error C1 Mean?

The Fisher & Paykel oven C1 error indicates a malfunction in the temperature sensor, leading to erratic temperature readings and potential overheating inside the oven. This error may cause the oven to shut down or stop heating, displaying C1 on the control panel even at low temperature settings. If the temperature exceeds approximately 305°C, it triggers this warning, suggesting a possible sensor failure or actual over-temperature condition.

Common Symptoms:

  • C1 displayed on oven control panel
  • Oven may shut down or stop heating
  • Error persists even at low temperature settings

Possible Causes

  • Temperature sensor/probe failure causing false over‑temperature reading (medium)
  • Actual over‑temperature condition inside oven cavity (low)

How to Fix Error C1

DIY Fix Power cycle and cool down

  1. Turn the oven off and allow it to cool completely.
  2. Once cooled, power off at the wall for 5–10 minutes.
  3. Power back on and check if C1 persists.

Technician Only Inspect and replace temperature sensor/probe

  1. Disconnect power to the oven at the breaker.
  2. Access the oven’s internal temperature probe/sensor per service manual.
  3. Test sensor resistance and continuity; compare to nominal spec.
  4. Replace sensor if out of specification.
  5. Test oven for correct temperature behavior after replacement.

Parts needed: Oven temperature probe/sensor

🛑 When to Call a Pro:
  • If the C1 error remains after cooling and power cycling
  • If there is visible overheating, burning smell, smoke, or other unsafe signs
  • If sensor testing is inconclusive

Technical Specifications

wattage
component Temperature Sensor
resistance 1,000 ohms at room temperature
part_number BPX100
voltage_rating 240V AC

Common Questions

What does C1 error mean on Fisher & Paykel oven?

C1 error indicates a temperature sensor malfunction leading to inaccurate heating and oven shutdown.

Can I fix Fisher & Paykel oven C1 error myself?

Yes, try power cycling the oven by turning it off, cooling it down, and then restarting.

How much does it cost to fix C1 error?

Estimated repair cost ranges from $50 to $200, including parts and labor.

When should I call a technician for C1?

Call a technician if C1 persists after power cycling or if you notice overheating or smoke.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!