Fisher & Paykel Microwave Error F10113-F20113
⚡ Quick Answer: The Fisher & Paykel microwave error F10113-F20113 signifies a power board malfunction, often causing the appliance to fail to operate and produce unus... ✅ DIY Fixable
What Does Error F10113-F20113 Mean?
The Fisher & Paykel microwave error F10113-F20113 signifies a power board malfunction, often causing the appliance to fail to operate and produce unusual buzzing sounds. This error indicates a fault in the power board, which may prevent the microwave from heating food properly.
Common Symptoms:
- Error displayed on microwave control panel indicating F10113 or F20113
- Microwave may not operate or may shut down due to detected power board fault
Possible Causes
- Power board malfunction (high)
How to Fix Error F10113-F20113
DIY Fix Power reset and basic checks
- Turn off and unplug the microwave from the power outlet.
- Wait at least 60 seconds before plugging it back in.
- Check for any obvious signs of damage to power cord or outlet.
Technician Only Inspect and replace power board
- Disconnect the microwave from mains power before servicing.
- Open the microwave cabinet following manufacturer safety procedures.
- Test the power board for faults using a multimeter and compare to service manual specifications.
- Replace the power board if tests confirm a fault.
- Reassemble and test the unit to verify error resolution.
Parts needed: Microwave power board / main control board
- If power board replacement is required
- If there are signs of electrical burning, smoke, or sparking
- If the error persists after basic resets
Next step
Choose the next step for F10113-F20113
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
- Typical part-only price
- $90 - $260
- DIY difficulty
- Hard
- Estimated time
- 30-75 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 1000W |
|---|---|
| component | Magnetron |
| resistance | 0.5-1.5 ohms |
| part_number | Fisher & Paykel 56201 |
| voltage_rating | 120V AC |
Common Questions
What does F10113-F20113 error mean on Fisher & Paykel microwave?
It indicates a power board malfunction, leading to operational failure and buzzing sounds.
Can I fix Fisher & Paykel microwave F10113-F20113 error myself?
Yes, you can perform a power reset and check for damage to the power cord or outlet.
How much does it cost to fix F10113-F20113 error?
Estimated repair costs range from USD 150 to 400, including parts and labor.
When should I call a technician for F10113-F20113?
Call a technician if power board replacement is needed or if you see signs of electrical burning or smoke.
Sources & References
- Microwave Fault Codes - Fisher & Paykel (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!