Fisher & Paykel Microwave Error F10101-F20101

⚡ Quick Answer: The Fisher & Paykel microwave error code F10101-F20101 indicates a malfunction in the temperature probe sensor. This internal fault typically results ... ⚠️ Difficulty Varies

What Does Error F10101-F20101 Mean?

The Fisher & Paykel microwave error code F10101-F20101 indicates a malfunction in the temperature probe sensor. This internal fault typically results in the microwave failing to heat food or operate normally, often accompanied by unusual buzzing sounds. Service is required to replace the broken probe for proper functionality.

Common Symptoms:

  • Error code displayed on control panel
  • Microwave fails to heat or operate normally

Possible Causes

  • Probe broken (high)

How to Fix Error F10101-F20101

DIY Fix Restart and Basic Checks

  1. Power off and unplug the microwave for a few minutes then plug back in to see if the fault clears.

Technician Only Replace Temperature Probe Sensor

  1. Disconnect power
  2. Open microwave casing
  3. Locate and test the temperature/probe sensor
  4. Replace the broken probe with OEM part
  5. Reassemble and test functionality

Parts needed: temperature probe sensor

🛑 When to Call a Pro:
  • If error persists after basic reset
  • If microwave heating is inconsistent or stops working

Next step

Choose the next step for F10101-F20101

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Capacitor

Stores electrical energy to assist in starting or running the motor efficiently.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Microwave Magnetron

Generates microwave energy for heating food and requires high-voltage service procedures.

$80 - $220 · Hard · 60-120 mins

Check fit & price
Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1000W
component Magnetron
resistance 0.5-1.5 ohms
part_number Fisher & Paykel 562022
voltage_rating 120V AC

Common Questions

What does F10101-F20101 error mean on Fisher & Paykel microwave?

It indicates a malfunction in the temperature probe sensor, causing the microwave to fail to heat.

Can I fix Fisher & Paykel microwave F10101-F20101 error myself?

You can try restarting the microwave, but replacing the temperature probe requires a technician.

How much does it cost to fix F10101-F20101 error?

Estimated repair cost is $50-$150 for parts, plus labor.

When should I call a technician for F10101-F20101?

Call if the error persists after a reset or if heating is inconsistent.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!