Fisher & Paykel Microwave Error F10000-F20000

⚡ Quick Answer: The F10000-F20000 error on Fisher & Paykel microwaves indicates a control board malfunction, leading to unresponsive buttons or erratic display behavi... ✅ DIY Fixable

What Does Error F10000-F20000 Mean?

The F10000-F20000 error on Fisher & Paykel microwaves indicates a control board malfunction, leading to unresponsive buttons or erratic display behavior. This error could stem from issues such as wiring faults, communication problems between boards, power board failures, or heating element malfunctions. Symptoms include the microwave displaying the fault code, failing to heat, or not completing cooking cycles.

Common Symptoms:

  • Microwave displays an F1xxxx or F2xxxx fault code on the control panel
  • Microwave may stop heating or refuse to start
  • Possible failure to complete cooking cycle

Possible Causes

  • Power board malfunction (medium)
  • Internal wiring or connection fault (medium)
  • Communication errors between control boards (medium)
  • Transformer, fuse or heating element issue (medium)

How to Fix Error F10000-F20000

DIY Fix Power cycle the microwave

  1. Unplug the microwave from the power outlet.
  2. Wait at least 60 seconds.
  3. Plug the microwave back in and power it on to see if the fault clears.

Technician Only Inspect and repair internal components

  1. Disconnect mains power and open the microwave casing.
  2. Check internal wiring harnesses, connectors, and board connections for continuity and secure seating.
  3. Test the power board, transformer, fuses, and heating element components with appropriate tools.
  4. Replace any faulty control boards or internal wiring identified during diagnostics.

Parts needed: Power/control board, Internal wiring harnesses, Transformer and fuses, Heating element assembly

🛑 When to Call a Pro:
  • If the fault code persists after a power cycle
  • If there are signs of burning smell, smoke, or unusual noises
  • If you are not experienced with high‑voltage appliance repair

Next step

Choose the next step for F10000-F20000

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F10000-F20000 error mean on Fisher & Paykel microwave?

It indicates a control board malfunction, leading to unresponsive buttons and display issues.

Can I fix Fisher & Paykel microwave F10000-F20000 error myself?

Yes, you can try power cycling the microwave by unplugging it for 60 seconds.

How much does it cost to fix F10000-F20000 error?

Repair costs typically range from $200 to $600, depending on parts and labor.

When should I call a technician for F10000-F20000?

Call a technician if the error persists after a power cycle or if you notice burning smells or unusual noises.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!