Electrolux Washing Machine Error EF4

⚡ Quick Answer: The Electrolux washing machine EF4 error indicates a failure in the water filling system, specifically that the flow meter is not detecting water flow... ✅ DIY Fixable

What Does Error EF4 Mean?

The Electrolux washing machine EF4 error indicates a failure in the water filling system, specifically that the flow meter is not detecting water flow. This error typically occurs early in the wash cycle, causing the machine to stop and remain locked. Symptoms include the washer failing to fill with water and a persistent beeping sound.

Common Symptoms:

  • Washer fails to fill or detect water entering
  • Error appears early in cycle during water intake
  • Machine may abort cycle due to no water detected

Possible Causes

  • Flow meter not detecting water flow (medium)
  • Water supply issue (tap off, low pressure, blocked hose) (medium)
  • Water inlet valve malfunction (medium)
  • Loose/damaged wiring between components (low)

How to Fix Error EF4

DIY Fix Check basic water supply and hoses

  1. Ensure both hot and cold water taps connected to the washer are fully turned on
  2. Inspect inlet hoses for kinks, bends, or visible blockages
  3. Disconnect hoses and flush them to clear debris

DIY Fix Restart machine and verify error persists

  1. Turn off the washing machine and unplug it from the outlet
  2. Wait 5–10 minutes
  3. Plug back in and start a wash cycle to see if EF4 still appears

Technician Only Test/replace flow meter (water flow sensor)

  1. Disconnect power and water supply
  2. Access the flow meter assembly (model-dependent location)
  3. With multimeter, test sensor continuity and function according to service specifications
  4. Replace flow meter if defective

Parts needed: Flow meter/water flow sensor

Technician Only Inspect/replace water inlet valve

  1. Turn off water and power
  2. Remove rear cover to access inlet valve assembly
  3. Test valve operation and coil resistance
  4. Replace inlet valve if it fails to open or has poor flow

Parts needed: Water inlet valve

🛑 When to Call a Pro:
  • If after basic checks and hose cleaning the error persists
  • If you are not comfortable accessing internal components
  • If multimeter diagnostics show irregular signals or multiple components may be faulty

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 10-20 ohms
part_number 134120900
voltage_rating 120V AC

Common Questions

What does EF4 error mean on Electrolux washing machine?

EF4 means there is a problem with the water filling system, preventing the machine from detecting water flow.

Can I fix Electrolux washing machine EF4 error myself?

Yes, check water supply, hoses, and restart the machine to see if the error persists.

How much does it cost to fix EF4 error?

Estimated repair costs for EF4 error range from $50 to $150 for parts.

When should I call a technician for EF4?

Call a technician if the error persists after basic checks or if you're uncomfortable accessing internal components.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!