Electrolux Washing Machine Error EF0

⚡ Quick Answer: The Electrolux washing machine error code EF0 signifies a malfunction in the door lock mechanism, often triggered by excessive foam, water leakage, or... ✅ DIY Fixable

What Does Error EF0 Mean?

The Electrolux washing machine error code EF0 signifies a malfunction in the door lock mechanism, often triggered by excessive foam, water leakage, or an unbalanced load. This error prevents the machine from starting, locking the door and causing the wash cycle to halt. Users may notice beeping sounds or flashing LEDs, along with visible foam in the drum. Addressing detergent use, load distribution, and checking for leaks can help resolve this issue.

Common Symptoms:

  • Washer displays EF0/EFo on the control panel
  • Machine may emit beeps or LED flashes (e.g., 15 beeps/flashes)
  • Wash cycle may stop or not proceed
  • Visible excessive foam in drum or dispenser area
  • Unbalanced load or water in base pan observed

Possible Causes

  • Excessive foam/over‑foaming (medium)
  • Water leakage detected (Aqua Control triggered) (medium)
  • Unbalanced load (medium)
  • Drainage issue/blockage (low)

How to Fix Error EF0

DIY Fix Check for foam and detergent issues

  1. Stop the wash cycle and open the door if safe
  2. Use less detergent appropriate for load size and water hardness
  3. Clean the detergent dispenser drawer to remove built‑up residue
  4. Run a rinse/spin cycle to clear excess foam

DIY Fix Inspect for water leakage and unbalanced load

  1. Check floor/base for signs of water under or around machine
  2. Redistribute laundry evenly in the drum
  3. Ensure machine is level on the floor
  4. Remove heavy/wet items that may cause imbalance

Technician Only Inspect drainage and Aqua Control systems

  1. Disconnect power and water supplies
  2. Check and clear the drain hose of kinks or blockages
  3. Inspect drain pump filter and clean out debris
  4. Test leak detection/Aqua Control tray and sensors for proper operation

Parts needed: Drain hose, Drain pump filter, Leak sensor/Aqua Control components

🛑 When to Call a Pro:
  • Persistent error after checking detergent, load balance and drainage
  • Visible water leakage that can’t be traced to simple hose or connection issue
  • Unusual noises from pump or components during operation

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number 134120900
voltage_rating 120V AC

Common Questions

What does EF0 error mean on electrolux washing machine?

EF0 indicates a door lock mechanism failure, often due to excessive foam, leakage, or an unbalanced load.

Can I fix electrolux washing machine EF0 error myself?

Yes, you can check for foam and detergent issues, redistribute laundry, and inspect for leaks.

How much does it cost to fix EF0 error?

The estimated repair cost ranges from $50 to $200, including parts and service.

When should I call a technician for EF0?

Call a technician if the error persists after troubleshooting or if there are signs of visible water leakage.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!