Electrolux Washing Machine Error E60
⚡ Quick Answer: The Electrolux washing machine E60 error indicates a heating system fault, primarily linked to the motor drive unit and often results in the machine s... ✅ DIY Fixable
What Does Error E60 Mean?
The Electrolux washing machine E60 error indicates a heating system fault, primarily linked to the motor drive unit and often results in the machine stopping mid-cycle. Common symptoms include water not reaching or maintaining the desired temperature and the error appearing during wash programs that require heating. This issue is frequently caused by a failure or malfunction of the heating element, which can disrupt the machine's overall functionality.
Common Symptoms:
- Machine stops mid‑cycle with error displayed
- Water not reaching or maintaining set temperature
- Error appears during wash programmes requiring heating
Possible Causes
- Heating element failure or malfunction (high)
How to Fix Error E60
DIY Fix Basic user checks and safety
- Unplug the washing machine to ensure safety before inspection.
- Check that the machine is correctly powered and inlet hoses are connected.
- Restart the machine after a short pause to see if the error clears.
Technician Only Diagnose heating circuit
- Disconnect the machine from power.
- Use a multimeter to test the resistance and continuity of the heating element.
- Test the temperature sensor (NTC) for correct resistance values at room temperature.
- Inspect wiring harness and connectors between heater, sensor, and control board for damage.
- Replace any faulty components found during testing.
Parts needed: Heating element, Temperature sensor (NTC), Wiring harness/connectors
- If multimeter testing indicates control board fault
- If error persists after checking wiring, sensor, and heating element
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 1-5 ohms |
| part_number | Electrolux 134149220 |
| voltage_rating | 120V AC |
Common Questions
What does E60 error mean on Electrolux washing machine?
E60 error indicates a heating system fault, preventing water from reaching or maintaining the set temperature.
Can I fix Electrolux washing machine E60 error myself?
Yes, unplug the machine, check power and hoses, then restart. If error persists, further inspection is needed.
How much does it cost to fix E60 error?
$50–$200+ depending on parts required for heating element or temperature sensor replacement.
When should I call a technician for E60?
Call a technician if multimeter testing indicates a control board fault or if the error persists after basic checks.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!