Electrolux Washing Machine Error E5E

⚡ Quick Answer: The Electrolux washing machine E5E error indicates a communication failure between the main control board and the motor (speed) control board. This of... ⚠️ Difficulty Varies

What Does Error E5E Mean?

The Electrolux washing machine E5E error indicates a communication failure between the main control board and the motor (speed) control board. This often results in the machine being unable to start or complete wash cycles. When this error occurs, the washing cycle may stop unexpectedly, and there may be no communication handshake between the control boards. Users may also notice that the machine does not proceed with washing cycles after the initial start.

Common Symptoms:

  • Washing cycle stops or fails to complete when the error appears
  • No communication handshake between control boards
  • Machine may fail to proceed with cycles after initial start

Possible Causes

  • Communication failure between main control board and motor (speed) control board (medium)

How to Fix Error E5E

DIY Fix Basic Checks and Power Reset

  1. Turn off and unplug the washing machine for at least 5 minutes to allow any temporary fault to clear.
  2. After waiting, plug back in and restart to see if the error persists.
  3. Visually inspect accessible wiring harnesses for obvious loose connections or damage (only if easily reachable without disassembly).

Technician Only Inspect and Repair Control Board Communication Circuit

  1. Open the washing machine cabinet to access the main control board and motor control board.
  2. Inspect wiring harnesses and connectors between the boards for corrosion, loose pins, or breaks.
  3. Use a multimeter to check continuity on communication lines between the boards.
  4. If wiring is intact but error persists, consider replacing the faulty controller board (main or motor control) as diagnosed.
  5. Re-test machine after repairs and clear error codes via service mode if applicable.

Parts needed: Control board (main), Motor (speed) control board, Wiring harness/connectors

🛑 When to Call a Pro:
  • If you are not comfortable opening the machine and working near live electronics
  • After basic resets and visual checks if error remains unchanged

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Electrolux 134120900
voltage_rating 120V AC

Common Questions

What does E5E error mean on electrolux washing machine?

E5E indicates a communication failure between the main control board and the motor control board, causing the machine to stop or fail to start.

Can I fix electrolux washing machine E5E error myself?

Yes, you can perform basic checks and a power reset. Unplug the machine for 5 minutes and check for loose connections.

How much does it cost to fix E5E error?

The estimated repair cost ranges from $150 to $500+, depending on parts and technician labor.

When should I call a technician for E5E?

Call a technician if you're uncomfortable working with live electronics or if the error persists after basic resets and checks.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!