Electrolux Washing Machine Error E58
⚡ Quick Answer: The Electrolux washing machine error E58 indicates a motor-related malfunction, often linked to an abnormal electrical current draw detected during op... ✅ DIY Fixable
What Does Error E58 Mean?
The Electrolux washing machine error E58 indicates a motor-related malfunction, often linked to an abnormal electrical current draw detected during operation. This error typically arises when the machine stops mid-cycle, fails to complete the spin, or exhibits unusual noises during agitation or spin phases. The most common cause is excessive current draw due to a mechanical load, such as a motor jam, leading to a stall in the motor's function. Immediate checks and resets can be attempted, but persistent issues may require professional attention.
Common Symptoms:
- Machine stops mid‑cycle and displays E58
- Motor does not spin correctly or stalls
- Error appears during agitation or spin phases
Possible Causes
- Excessive current draw on motor phase due to mechanical load (motor jam) (medium)
How to Fix Error E58
DIY Fix Basic checks and reset
- Turn the washer off and unplug it from the power outlet
- Wait several minutes then restore power to see if error clears
- Ensure the drum can turn freely by hand with no heavy obstructions
Technician Only Inspect and repair motor/motor system
- Disconnect power and access the washer’s motor assembly
- Check the motor and shaft for signs of mechanical binding or obstruction
- Test motor windings for correct resistance and signs of internal short
- Inspect related wiring and connectors for damage
- Replace defective motor or speed control board as needed
Parts needed: motor assembly, speed control board, motor wiring harness
- If error persists after power reset and basic checks
- If the motor does not turn freely or humming noises occur
- If internal component testing reveals faults
Next step
Choose the next step for E58
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 1-5 ohms |
| part_number | EWMOTDRIVE123 |
| voltage_rating | 240V AC |
Common Questions
What does E58 error mean on electrolux washing machine?
E58 indicates a motor malfunction due to abnormal current draw, often resulting in the machine stopping mid-cycle.
Can I fix electrolux washing machine E58 error myself?
Yes, you can try resetting the machine and ensuring the drum turns freely without obstructions.
How much does it cost to fix E58 error?
Repair costs for E58 can range from $150 to $500+, depending on parts and labor needed.
When should I call a technician for E58?
Call a technician if the error persists after a reset, if the motor is not turning freely, or if humming noises occur.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!