Electrolux Washing Machine Error E43
⚡ Quick Answer: The Electrolux washing machine error E43 indicates a malfunction in the door lock mechanism, typically due to a fault in the door lock assembly or con... ✅ DIY Fixable
What Does Error E43 Mean?
The Electrolux washing machine error E43 indicates a malfunction in the door lock mechanism, typically due to a fault in the door lock assembly or control circuitry. This error often prevents the machine from starting, as the door may appear closed but fails to engage the lock properly. Checking the door's closure and listening for the lock engagement are initial steps to diagnose the issue.
Common Symptoms:
- Machine won’t start or proceed past door‑lock phase
- Error code E43 displayed on control panel
- Door appears closed but lock not engaging
Possible Causes
- Faulty door lock assembly (mechanical or electrical failure) (medium)
- Faulty door lock triac or associated control circuitry on main board (medium)
- Loose or damaged wiring between control board and door lock (medium)
How to Fix Error E43
DIY Fix Basic checks for door lock issue
- Ensure the washing machine door is fully closed and latched.
- Power off the washer, wait a few minutes, and restart to see if error clears.
- Listen/feel for the door lock engaging when starting a cycle.
Technician Only Inspect and repair door lock and control circuitry
- Disconnect power to the machine.
- Remove access panels to reach the door lock assembly.
- Check wiring harness, connectors, and continuity to the door lock.
- Test/replace the door lock assembly if defective.
- If door lock and wiring are good, inspect the control board’s triac and related components for faults and replace as needed.
Parts needed: door lock assembly, wiring harness, control board / triac components
- If the error persists after basic checks
- If you cannot safely access internal components
- If control board diagnostics are required
Next step
Choose the next step for E43
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E43 error mean on Electrolux washing machine?
E43 indicates a door lock malfunction, preventing the machine from starting.
Can I fix Electrolux washing machine E43 error myself?
Yes, check if the door is fully closed, restart the machine, and listen for lock engagement.
How much does it cost to fix E43 error?
Repair costs range from $80 to $300+, depending on parts and labor.
When should I call a technician for E43?
Call a technician if the error persists after basic checks or if you can't safely access the components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!