Electrolux Washing Machine Error E42
⚡ Quick Answer: The Electrolux washing machine error code E42 indicates a failure in the door lock mechanism, preventing the machine from starting its cycle. This mal... ✅ DIY Fixable
What Does Error E42 Mean?
The Electrolux washing machine error code E42 indicates a failure in the door lock mechanism, preventing the machine from starting its cycle. This malfunction can occur due to the door not being properly closed or obstructed, or issues with the wiring and connectivity of the door lock assembly. Users may notice that the door latch does not click or lock correctly, and the machine may display E42, halting operation. Resolving this issue often requires confirming the door is fully closed and resetting the machine.
Common Symptoms:
- Washer displays E42 and will not start cycle
- Door latch doesn’t click or lock properly
- Door remains locked or unlocks unexpectedly
Possible Causes
- Door not properly closed or obstructed (high)
- Wiring/connectivity issue at door lock assembly (medium)
How to Fix Error E42
DIY Fix Basic door check and reset
- Ensure the door is fully shut and latched with audible click
- Inspect the door seal and opening for debris or clothing obstructions
- Unplug the machine for ~5 minutes to reset internal logic then restart
Technician Only Inspect/replace door lock assembly and wiring
- Disconnect power and access the door lock assembly
- Visually inspect wiring harness for damage or loose connections
- Test door lock switch and actuator for continuity and proper operation
- Replace the door lock mechanism if defective
Parts needed: door lock assembly, wiring harness
- If error persists after basic door closure checks and reset
- If door lock mechanism appears damaged or wiring fault is suspected
Next step
Choose the next step for E42
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E42 error mean on electrolux washing machine?
E42 indicates a door lock mechanism failure, preventing the washer from starting.
Can I fix electrolux washing machine E42 error myself?
Yes, check if the door is fully closed, inspect for obstructions, and reset the machine.
How much does it cost to fix E42 error?
Repair costs range from $50 to $150 for parts, plus service labor.
When should I call a technician for E42?
Call a technician if the error persists after checking the door or if damage is suspected.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!