Electrolux Washing Machine Error E35
⚡ Quick Answer: The Electrolux washing machine error E35 indicates an overfill condition, where the water level sensor detects that the water level exceeds the accept... ✅ DIY Fixable
What Does Error E35 Mean?
The Electrolux washing machine error E35 indicates an overfill condition, where the water level sensor detects that the water level exceeds the acceptable limit. This can lead to the machine failing to fill or drain properly. Common symptoms include water rising too high in the drum, the washer stopping during the fill cycle, or continuous filling without stopping. Potential causes include a faulty water inlet valve, malfunctioning pressure sensor, or a blocked pressure hose.
Common Symptoms:
- Water level rising too high in drum
- Washer stops with E35 during fill or early cycle
- Continuous water fill or won’t stop filling
Possible Causes
- Faulty or stuck water inlet valve allowing excessive water fill (high)
- Pressure sensor or pressure switch error/malfunction (high)
- Blocked or obstructed pressure hose/chamber causing misreporting of water level (medium)
How to Fix Error E35
DIY Fix Basic checks and reset
- Turn off and unplug the washer.
- Turn off water supply valves to prevent flooding.
- Check hoses and connections for kinks or visible leaks.
- Perform a power reset by unplugging machine for a minute then restarting.
Technician Only Inspect and repair inlet water control and pressure system
- Verify if the water inlet valve closes properly; replace if stuck or leaking.
- Inspect pressure sensor, pressure hose and chamber for blockage or damage; clean or replace.
- Check electrical connections between pressure switch and control board.
- Test the washer with small cycle to verify proper water level control after repair.
Parts needed: water inlet valve assembly, pressure sensor/pressure switch, pressure hose/tubing
- If water continues to overfill after basic checks and reset
- If you are uncomfortable accessing internal components
- If repeated attempts do not resolve E35
Next step
Choose the next step for E35
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E35 error mean on electrolux washing machine?
E35 indicates an overfill condition where the water level exceeds the acceptable limit, causing filling or draining issues.
Can I fix electrolux washing machine E35 error myself?
Yes, you can perform basic checks like ensuring hoses are not kinked or leaking and resetting the machine.
How much does it cost to fix E35 error?
Repair costs for E35 can range from $50 to $250, depending on parts and labor.
When should I call a technician for E35?
Call a technician if the issue persists after basic checks, if you are uncomfortable working on internal components, or if attempts to resolve the E35 error fail.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!