Electrolux Washing Machine Error E31
⚡ Quick Answer: The Electrolux washing machine E31 error indicates a malfunction in the door lock mechanism or a pressure sensor issue, preventing the machine from st... ✅ DIY Fixable
What Does Error E31 Mean?
The Electrolux washing machine E31 error indicates a malfunction in the door lock mechanism or a pressure sensor issue, preventing the machine from starting the wash cycle. This error often appears during the early or mid wash cycle and may cause the machine to stop filling or draining properly due to incorrect water level detection. It can stem from a faulty pressure switch, loose wiring, or a blockage in the pressure hose.
Common Symptoms:
- Error appears during early or mid wash cycle
- Machine may stop filling or draining properly
- Water level not correctly detected by machine diagnostics
Possible Causes
- Faulty or defective pressure switch (pressure sensor) (medium)
- Loose or faulty wiring/connection to pressure switch (medium)
- Pressure hose blockage or issue with pressure sensing tube (medium)
- Control board not receiving correct pressure signal (low)
How to Fix Error E31
DIY Fix Basic checks before calling service
- Power off and unplug the washer
- Check water inlet hoses for kinks or blockages
- Ensure water taps are fully open
- Inspect visible pressure hose for kinks or debris
- Restart machine after a short unplug period
Technician Only Inspect and test pressure switch and associated components
- Disconnect washer from power and water
- Access pressure switch and inspect wiring for continuity with a multimeter
- Check pressure hose for blockages or damage
- Replace faulty pressure switch if testing indicates failure
- Verify control board input signals and replace board only if pressure system is confirmed good
Parts needed: Pressure switch (pressure sensor), Pressure hose/tubing, Control board (if needed)
- If internal pressure sensing components need accessing and user is not experienced
- If error persists after checking hoses and basic connections
Next step
Choose the next step for E31
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E31 error mean on Electrolux washing machine?
E31 indicates a door lock mechanism malfunction or pressure sensor issue, preventing the wash cycle from starting.
Can I fix Electrolux washing machine E31 error myself?
Yes, check hoses for kinks or blockages and ensure water taps are fully open before calling for service.
How much does it cost to fix E31 error?
Repair costs range from $50 to $350, depending on parts and labor needed.
When should I call a technician for E31?
Call a technician if the error persists after checking hoses or if internal components need access.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!