Electrolux Washing Machine Error E22
⚡ Quick Answer: The Electrolux washing machine E22 error code indicates a drain pump failure, where the washer fails to drain water after the rinse cycle. This is oft... ✅ DIY Fixable
What Does Error E22 Mean?
The Electrolux washing machine E22 error code indicates a drain pump failure, where the washer fails to drain water after the rinse cycle. This is often accompanied by unusual noises during the spin cycle and results in water remaining in the drum. Inspecting the drain hose and filter for clogs is crucial, as these are common causes of this error.
Common Symptoms:
- Water remains in the drum after a wash/rinse cycle
- Cycle stops mid‑way due to inability to expel water
- Error code E22 displayed on control panel
Possible Causes
- Clogged drain hose or filter (high)
- Faulty or obstructed drain pump (medium)
How to Fix Error E22
DIY Fix Check and clean drain hose and filter
- Unplug the washing machine and turn off water supply.
- Locate the drain filter panel at the bottom front of the machine.
- Place a shallow tray to catch water and slowly unscrew the filter cap.
- Remove debris, lint, or foreign objects from the filter and drain hose opening.
- Straighten and inspect the drain hose for kinks or blockages.
- Reinstall the filter and secure the hose, then run a short drain or rinse cycle to test.
Technician Only Inspect or replace drain pump
- Disconnect power and water to the washer.
- Access the drain pump, typically at the rear or bottom of the washer.
- Check the pump impeller for debris and free movement.
- Test pump electrical continuity with a multimeter.
- Replace the pump if defective or if impeller is damaged.
Parts needed: Drain pump assembly, Drain pump gasket/seals (if needed)
- If clearing hoses and filter does not resolve error and water still does not drain.
- If noise, burning smell, or electrical issues accompany the error code.
- If the drain pump fails continuity testing or shows physical damage.
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EWMED70JSS |
| voltage_rating | 120V AC |
Common Questions
What does E22 error mean on Electrolux washing machine?
E22 indicates a drain pump failure, causing water to remain in the drum after a wash.
Can I fix Electrolux washing machine E22 error myself?
Yes, you can check and clean the drain hose and filter to resolve the issue.
How much does it cost to fix E22 error?
Repair costs for the E22 error range from ¥5,000 to ¥20,000, depending on parts and labor.
When should I call a technician for E22?
Call a technician if cleaning hoses doesn't work, or if you notice noise, burning smell, or electrical issues.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!