Electrolux Washing Machine Error E20

⚡ Quick Answer: The Electrolux washing machine E20 error indicates a drainage issue, where the machine fails to remove water from the drum during wash or spin cycles.... ✅ DIY Fixable

What Does Error E20 Mean?

The Electrolux washing machine E20 error indicates a drainage issue, where the machine fails to remove water from the drum during wash or spin cycles. This may result in the machine stopping mid-cycle and water remaining in the drum, often accompanied by beeps or flashing lights on the display. Common causes include a clogged drain filter or a faulty drain pump, necessitating inspection and potential repair.

Common Symptoms:

  • Machine stops mid‑cycle before spin
  • Water remains in drum after cycle
  • Display shows E20 with possible beeps/flashes

Possible Causes

  • Clogged drain filter (high)
  • Faulty or obstructed drain pump (medium)

How to Fix Error E20

DIY Fix Check and clean drain filter

  1. Turn off and unplug the washing machine
  2. Locate the drain filter at the front bottom and place a towel/pan to catch water
  3. Unscrew and remove the filter cap
  4. Remove lint, debris, or objects and rinse the filter
  5. Reinstall filter and tighten securely
  6. Run a short drain/spin cycle to test

DIY Fix Inspect drain hose

  1. Unplug machine and pull out from wall
  2. Check drain hose for kinks, twists, or visible blockages
  3. Straighten hose and, if necessary, detach and flush with water to clear blockage
  4. Ensure correct positioning per Electrolux guidelines
  5. Test machine to confirm if error clears

Technician Only Evaluate drain pump function

  1. Disconnect power and access drain pump (panel removal may be required)
  2. Inspect impeller for obstructions and ensure it spins freely
  3. Test pump operation and electrical continuity
  4. Replace pump if defective

Parts needed: drain pump assembly, pump gasket/seals if needed

🛑 When to Call a Pro:
  • If E20 persists after cleaning filter/hose and ensuring no kinks
  • If pump shows error sounds or no operation
  • If water leaks or machine fails to start safely

Technical Specifications

wattage 100W
component Drain Pump
resistance 10-20 ohms
part_number EWM-123456
voltage_rating 240V AC

Common Questions

What does E20 error mean on electrolux washing machine?

The E20 error signifies a drainage issue, with water not being removed properly from the drum.

Can I fix electrolux washing machine E20 error myself?

Yes, you can check and clean the drain filter and inspect the drain hose for blockages.

How much does it cost to fix E20 error?

The estimated repair cost for the E20 error ranges from $80 to $250.

When should I call a technician for E20?

Call a technician if the E20 error persists after cleaning, if the pump is unresponsive, or if there are leaks.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!