Electrolux Dishwasher Error PF

⚡ Quick Answer: The Electrolux dishwasher error code PF indicates a power failure detection issue, which may cause the appliance to stop mid-cycle or fail to start. T... ✅ DIY Fixable

What Does Error PF Mean?

The Electrolux dishwasher error code PF indicates a power failure detection issue, which may cause the appliance to stop mid-cycle or fail to start. This error typically arises from an actual power interruption, unstable electrical supply, or loose connections. When the error occurs, the display may flash, signaling that the dishwasher has detected a loss of power or that the supply voltage is outside the normal range.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays PF
  • Dishwasher won’t start or resumes only after power normalizes

Possible Causes

  • Actual power interruption (breaker trip, outage, surge) (high)
  • Unstable household electrical supply (voltage out of range) (high)
  • Loose or faulty power connection (medium)

How to Fix Error PF

DIY Fix Reset dishwasher and check power

  1. Cancel the PF error by pressing the START/CANCEL button per Electrolux instructions
  2. Ensure the dishwasher is correctly plugged in and the outlet is powered
  3. Check circuit breaker or fuse for the dishwasher circuit and reset if tripped
  4. Restart a wash cycle once power is stable

Technician Only Inspect electrical supply and connections

  1. Measure household supply voltage at the dishwasher outlet to ensure it’s within normal range
  2. Inspect and tighten power cord connections, inlet plug, and outlet contacts
  3. Check wiring continuity between outlet and dishwasher terminal block
  4. Evaluate for damaged power cord or internal wiring issues

Parts needed: multimeter/test equipment, replacement power cord or terminals if faulty

🛑 When to Call a Pro:
  • If PF reoccurs frequently without obvious power interruptions
  • If user is uncomfortable working with electrical supply or breaker panel

Technical Specifications

wattage 1440W
component Control Board
resistance 10-20 ohms
part_number 154637101
voltage_rating 120V AC

Common Questions

What does PF error mean on Electrolux dishwasher?

PF error indicates a power failure, causing the dishwasher to stop or not start.

Can I fix Electrolux dishwasher PF error myself?

Yes, you can reset the dishwasher and check the power supply and connections.

How much does it cost to fix PF error?

$50–$150 for electrician service; parts extra if needed.

When should I call a technician for PF?

Call if the PF error recurs frequently or if you're uncomfortable with electrical work.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!