Electrolux Dishwasher Error iE0
⚡ Quick Answer: The Electrolux dishwasher error code iE0 signifies a flow control position error, indicating that the diverter or flow control valve has not reached i... ✅ DIY Fixable
What Does Error iE0 Mean?
The Electrolux dishwasher error code iE0 signifies a flow control position error, indicating that the diverter or flow control valve has not reached its correct position. This issue often results in a humming sound and water pooling at the bottom of the dishwasher, causing the cycle to stop or fail to start properly. Addressing this problem typically involves inspecting the flow control system or resetting the unit.
Common Symptoms:
- Error code iE0 appears on display
- Dishwasher cycle stops or will not start properly
Possible Causes
- Flow control/diverter valve failed to reach correct position (medium)
- Defective wiring or connection to flow control system (medium)
- Faulty main control board reporting flow control error (low)
How to Fix Error iE0
DIY Fix Check power/reset unit
- Turn off dishwasher power at breaker or unplug for ~60 seconds
- Restore power and attempt to restart a cycle
Technician Only Inspect and service flow control/diverter system
- Access the dishwasher’s flow control/diverter assembly
- Check wiring harness and connectors for damage or loose connections
- Test the flow control motor and position sensor for proper operation
- Replace defective flow control components if needed
Parts needed: Flow control/diverter valve assembly, Wiring harness/connectors
- If you are uncomfortable accessing internal components (wiring/valve)
- If error persists after basic reset and inspection
Next step
Choose the next step for iE0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | 154567401 |
| voltage_rating | 120V AC |
Common Questions
What does iE0 error mean on electrolux dishwasher?
The iE0 error indicates a flow control position error, often leading to a humming sound and water pooling at the bottom.
Can I fix electrolux dishwasher iE0 error myself?
Yes, you can try resetting the dishwasher by turning off the power for about 60 seconds before restoring it.
How much does it cost to fix iE0 error?
Repair costs for the iE0 error can range from $80 to $250+, depending on parts and service rates.
When should I call a technician for iE0?
Call a technician if you're uncomfortable with internal inspections or if the error persists after a basic reset.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!