Electrolux Dishwasher Error iD0
⚡ Quick Answer: The Electrolux dishwasher error iD0 indicates a malfunction in the drain pump's tacho sensor. This error occurs when the wash pump operates but fails ... ✅ DIY Fixable
What Does Error iD0 Mean?
The Electrolux dishwasher error iD0 indicates a malfunction in the drain pump's tacho sensor. This error occurs when the wash pump operates but fails to provide motor speed feedback, often resulting in unusual noises and the inability to drain water. If the error persists, it may suggest issues with the wiring, connectors, or a defective wash pump motor.
Common Symptoms:
- Dishwasher displays iD0 when starting or during wash cycle
- Wash pump activates but no motor speed feedback is detected
- Dishwasher may continue washing without heating water
Possible Causes
- Wash pump tacho sensor circuit not providing feedback (medium)
- Wiring/connectors between pump tacho and main PCB faulty (medium)
- Defective wash pump motor (tacho or motor itself) (medium)
- Main PCB failing to interpret tacho signal (low)
How to Fix Error iD0
DIY Fix Check basic reset and power cycling
- Turn off dishwasher power at the breaker or unplug it for ~60 seconds
- Restore power and attempt a normal cycle start
- See if the error persists
Technician Only Inspect and test wash pump tacho circuit
- Disconnect power and access wash pump assembly
- Check continuity and secure connection of wiring between tacho sensor and main PCB
- Measure tacho sensor resistance (often around specified ohm value per model)
- Replace wash pump/tacho assembly if sensor is out of spec or damaged
- If wiring and tacho check out but issue persists, test/replace main PCB
Parts needed: Wash pump with tacho sensor, Wiring harness/connectors, Main control PCB (if needed)
- If error persists after power cycling
- If there is no experience working with internal wiring or motor components
- If tacho/motor tests are inconclusive or difficult to perform
Next step
Choose the next step for iD0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-30 ohms |
| part_number | 154567001 |
| voltage_rating | 120V AC |
Common Questions
What does iD0 error mean on Electrolux dishwasher?
The iD0 error indicates a malfunction in the wash pump's tacho sensor, affecting water drainage.
Can I fix Electrolux dishwasher iD0 error myself?
Yes, you can try power cycling the dishwasher to see if the error resolves.
How much does it cost to fix iD0 error?
Repair costs are moderate for parts and moderate to high for labor.
When should I call a technician for iD0?
Call a technician if the error persists after power cycling or if you lack experience with electrical components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!