Electrolux Dishwasher Error iB0

⚡ Quick Answer: The Electrolux dishwasher error code iB0 indicates a malfunction related to the turbidity sensor, responsible for measuring water clarity. This error ... ✅ DIY Fixable

What Does Error iB0 Mean?

The Electrolux dishwasher error code iB0 indicates a malfunction related to the turbidity sensor, responsible for measuring water clarity. This error often leads to the dishwasher stopping shortly after starting and may prevent the wash cycle from proceeding. The issue may stem from a failure or miscalibration of the turbidity sensor, wiring problems, or a potential fault in the control board. Unusual noises during operation may also accompany this error.

Common Symptoms:

  • Dishwasher stops shortly after start
  • Error code iB0 displayed or indicator blinking ~11 times
  • Dishwasher may not proceed with wash cycle

Possible Causes

  • Turbidity sensor failure or miscalibration (medium)
  • Wiring or connection issue related to the turbidity sensor (medium)
  • Control board (PCB) fault affecting sensor data processing (low)

How to Fix Error iB0

DIY Fix Basic checks for iB0 error

  1. Turn off the dishwasher and disconnect power for 5–10 minutes to reset possible transient faults.
  2. Inspect visible wiring under the dishwasher for obvious damage or loose connectors near the turbidity sensor area if accessible.
  3. Ensure dishwasher interior is not flooded and water drains normally before retrying a cycle.

Technician Only Diagnose and service turbidity sensor circuit

  1. Access and visually inspect the turbidity sensor and its harness for corrosion, damage, or loose pins.
  2. Use a multimeter to check continuity of sensor wiring back to the control board.
  3. If wiring is intact, test or replace the turbidity sensor assembly.
  4. If error persists after sensor replacement, evaluate control board for faults in the sensor interface circuitry.

Parts needed: Turbidity sensor assembly, Wiring harness/connector, Control board (if necessary)

🛑 When to Call a Pro:
  • If error persists after basic user-level checks and resetting power.
  • If you are not comfortable opening the dishwasher or diagnosing electrical components.
  • If water leakage or other error codes accompany iB0, indicating broader system issues.

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-20 ohms
part_number 154567501
voltage_rating 120V AC

Common Questions

What does iB0 error mean on electrolux dishwasher?

The iB0 error indicates a turbidity sensor malfunction, causing the dishwasher to stop shortly after starting.

Can I fix electrolux dishwasher iB0 error myself?

Yes, you can try basic checks like resetting the power and inspecting wiring for damage.

How much does it cost to fix iB0 error?

Repair costs for the iB0 error can range from $50 to $400, depending on parts and service rates.

When should I call a technician for iB0?

Call a technician if the error persists after user checks, if you're uncomfortable with repairs, or if other issues arise.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!