Electrolux Dishwasher Error i80

⚡ Quick Answer: The Electrolux dishwasher error code i80 indicates a malfunction in the auto-door or AirDry function, typically related to the door's operation. You m... ✅ DIY Fixable

What Does Error i80 Mean?

The Electrolux dishwasher error code i80 indicates a malfunction in the auto-door or AirDry function, typically related to the door's operation. You may notice the error appearing at the start or during the cycle, and the dishwasher may not start normally. Unusual noises can also accompany this issue. If the error persists after a basic power reset, it suggests a more serious problem with the door latch or switch mechanism.

Common Symptoms:

  • Dishwasher displays i80 at start or during cycle and may not start normally.
  • Auto door opener or AirDry function not operating correctly.
  • Error persists after basic power reset.

Possible Causes

  • Auto door/AirDry mechanism malfunction (high)
  • Door latch or door switch issue (medium)

How to Fix Error i80

DIY Fix Basic reset and initial inspection

  1. Disconnect power by unplugging the dishwasher or switching off at the circuit breaker.
  2. Wait approximately 1 minute and restore power.
  3. Ensure filters and sump are clean and free of foam/suds as per Electrolux support guidance.
  4. Check that the dishwasher door is fully closed and latched correctly.

Technician Only Inspect door mechanism and switches, service as needed

  1. Test door latch and door switch for proper operation and continuity.
  2. Inspect related wiring harnesses for damage or loose connections.
  3. If components are defective, replace the faulty door latch or switch.
  4. Use manufacturer diagnostic tools if available to verify AutoDoor/AirDry function.
  5. Refer to service manual for model‑specific procedures.

Parts needed: Door latch assembly, Door switch, Wiring harness

Technician Only Control board diagnosis and repair

  1. If basic diagnostics do not resolve the i80 error, test the main control board for faults.
  2. Check for signs of moisture damage or failed components around EEPROM/logic circuitry.
  3. Reflash firmware or replace the control board if confirmed defective.

Parts needed: Main control board

🛑 When to Call a Pro:
  • If error persists after basic reset and door/latch inspection, contact Electrolux authorized service.
  • If internal components need to be accessed and you are not trained in electrical repairs.

Technical Specifications

wattage 60W
component Drain Pump
resistance 5-15 ohms
part_number 154567401
voltage_rating 120V AC

Common Questions

What does i80 error mean on electrolux dishwasher?

The i80 error indicates a malfunction in the auto-door or AirDry function, preventing normal operation.

Can I fix electrolux dishwasher i80 error myself?

Yes, you can perform a basic reset and inspect the door latch and switches before seeking professional help.

How much does it cost to fix i80 error?

The estimated repair cost for the i80 error ranges from $50 to $200 for parts and labor, depending on your location.

When should I call a technician for i80?

Call a technician if the error persists after a reset and inspection, or if you are not trained to access internal components.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!