Daewoo Washing Machine Error E6

⚡ Quick Answer: The E6 error on Daewoo washing machines indicates a motor protection issue, triggered by excessive current draw. This can lead to the motor stopping a... ✅ DIY Fixable

What Does Error E6 Mean?

The E6 error on Daewoo washing machines indicates a motor protection issue, triggered by excessive current draw. This can lead to the motor stopping and the machine displaying the E6 code, often accompanied by an alarm. Common causes include an obstruction between the drum and door seal, a fault in the motor, or issues with the electronic control board.

Common Symptoms:

  • Motor stops and machine displays E6
  • Alarm sounds periodically
  • Occurs during motor operation/spin

Possible Causes

  • Excessive current draw on the motor (EMG trigger) (medium)
  • Obstruction between drum and door seal (clothes/jammed items) (medium)
  • Motor fault or electronic control board issue (medium)

How to Fix Error E6

DIY Fix Check for trapped items and reset

  1. Turn off and unplug the washing machine.
  2. Open the door and check around the drum seal for stuck clothes or objects.
  3. Remove any jammed items and redistribute laundry evenly.
  4. Close the door securely and plug in the machine.
  5. Power on and see if E6 clears.

Technician Only Inspect motor load and control electronics

  1. Disconnect power and access the motor and EMG sensing circuitry.
  2. Check motor windings and connections for signs of wear or damage.
  3. Measure current draw under controlled conditions to confirm EMG trigger.
  4. Inspect and test the PCB for faults potentially causing false EMG conditions.

Parts needed: motor assembly, PCB/controller, EMG current sensor wiring

🛑 When to Call a Pro:
  • After repeated E6 occurrences following checks
  • If motor or control board testing indicates electrical faults
  • If internal inspection reveals damaged components

Next step

Choose the next step for E6

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Daewoo 123456789
voltage_rating 120V AC

Common Questions

What does E6 error mean on Daewoo washing machine?

E6 indicates a motor protection error due to excessive current, causing the motor to stop.

Can I fix Daewoo washing machine E6 error myself?

Yes, check for trapped items in the drum seal and redistribute laundry, then reset the machine.

How much does it cost to fix E6 error?

Repair costs range from $100 to $300+, depending on parts and labor.

When should I call a technician for E6?

Call if E6 persists after checks or if there are signs of electrical faults.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!